Digga's range of drilling augers for 4.5-12T excavators & backhoes, and truck cranes & telehandlers are the ultimate in performance, quality and cost effectiveness.
Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control. Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.
Available in Single Speed, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.
Digga's 2-Speed Drilling Augers are designed to suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders and backhoes with flows between 10 - 48gpm. We distribute our 2-Speed Drilling Augers throughout North America.
Single Speed Auger Drive Features:
Compact high torque Digga manufactured gearbox
Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
2 piece shaft design ensures maximum side load ratings without increasing load on bearings
Single speed & two speed models available
Lifetime shaft pull out warranty
5 year gearbox and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
2-Speed Auger Drive Features:
Compact high torque Digga manufactured gearbox
Highly efficient design with less moving parts
Fitted with Eaton VIS motor
Integrated PRV (Pressure Relief Valve)
Extreme duty shaft locking system
Drive fits down the hole for greater digging depth
5 year gearbox and 3 year motor warranty
Low maintenance
Single Speed Specs
5DDS
6DDS
7DDS
9DDS
12DDS
Torque (FT-LBS @ 3000 PSI)
3,903
4,909
6,162
7,811
9,893
Max Torque (FT-LBS @ 3500 PSI)
4,553
5,728
7,189
9,112
11,542
Recommended Flow (GPM)
10-36
12-36
14-36
18-48
22-48
Motor Type
Eaton
Eaton
Eaton
Eaton
Eaton
Max Pressure (Do Not Exceed)
3500 PSI @ 27 GPM
3500 PSI @ 29 GPM
Max Flow (Do Not Exceed)
55 GPM @ 1700 PSI
55 GPM @ 1800 PSI
Max Horse Power
55
55
55
60
60
Pressure Relief Valve
Included
Included
Included
Included
Included
Standard Output Shaft
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
Halo
Optional
Optional
Optional
Optional
Optional
Recommended Auger
A6 / RC6
A6 / RC6
A6 / RC6
A8 / RC8
A8 / RC8
Max Drilling Diameter (Clay / Shale)¹
24"
30"
30"
48"
36"
Max Drilling Diameter (Earth)¹
40"
40"
48"
48"
48"
Weight (LBS)
290
290
290
350
350
Overall Length (in)
33.7"
33.7"
33.7"
37.2"
37.2"
Diameter (in)
11.4"
11.4"
11.4"
11.4"
11.4"
2-Speed Specs
5DDT
6DDT
7DDT
12DDT
Torque (FT-LBS @ 3000 PSI)
4,067
5,012
6,306
10,310
Max Torque (FT-LBS @ 3500 PSI)
4,745
5,847
7,357
12,028
Recommended Flow (GPM)
10-36
10-36
10-36
10-46
Motor Type
Eaton
Eaton
Eaton
Eaton
Max Pressure (Do Not Exceed)
3500 PSI @ 27 GPM
3500 PSI @ 29 GPM
Max Flow (Do Not Exceed)
53 GPM @ 1800 PSI
53 GPM @ 1950 PSI
Max Horse Power
55
55
55
60
Pressure Relief Valve
Included
Included
Included
Included
Standard Output Shaft
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
Recommended Auger
A6 / RC6
A6 / RC6
A6 / RC6
A8 / RC8
Max Drilling Diameter (Clay / Shale)¹
24"
30"
30"
36"
Max Drilling Diameter (Earth)¹
40"
40"
48"
48"
Weight (lbs.)
350
350
350
376
Overall Length (in.)
34.4"
34.4"
34.4"
35.7"
Diameter (in.)
14.4"
14.4"
14.4"
14.4"
(¹) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Digga's range of drilling augers for 4.5-12T excavators & backhoes, and truck cranes & telehandlers are the ultimate in performance, quality and cost effectiveness.
Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control. Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.
Available in Single Speed, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.
Digga's 2-Speed Drilling Augers are designed to suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders and backhoes with flows between 10 - 48gpm. We distribute our 2-Speed Drilling Augers throughout North America.
Single Speed Auger Drive Features:
Compact high torque Digga manufactured gearbox
Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
2 piece shaft design ensures maximum side load ratings without increasing load on bearings
Single speed & two speed models available
Lifetime shaft pull out warranty
5 year gearbox and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
2-Speed Auger Drive Features:
Compact high torque Digga manufactured gearbox
Highly efficient design with less moving parts
Fitted with Eaton VIS motor
Integrated PRV (Pressure Relief Valve)
Extreme duty shaft locking system
Drive fits down the hole for greater digging depth
5 year gearbox and 3 year motor warranty
Low maintenance
Single Speed Specs
5DDS
6DDS
7DDS
9DDS
12DDS
Torque (FT-LBS @ 3000 PSI)
3,903
4,909
6,162
7,811
9,893
Max Torque (FT-LBS @ 3500 PSI)
4,553
5,728
7,189
9,112
11,542
Recommended Flow (GPM)
10-36
12-36
14-36
18-48
22-48
Motor Type
Eaton
Eaton
Eaton
Eaton
Eaton
Max Pressure (Do Not Exceed)
3500 PSI @ 27 GPM
3500 PSI @ 29 GPM
Max Flow (Do Not Exceed)
55 GPM @ 1700 PSI
55 GPM @ 1800 PSI
Max Horse Power
55
55
55
60
60
Pressure Relief Valve
Included
Included
Included
Included
Included
Standard Output Shaft
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
Halo
Optional
Optional
Optional
Optional
Optional
Recommended Auger
A6 / RC6
A6 / RC6
A6 / RC6
A8 / RC8
A8 / RC8
Max Drilling Diameter (Clay / Shale)¹
24"
30"
30"
48"
36"
Max Drilling Diameter (Earth)¹
40"
40"
48"
48"
48"
Weight (LBS)
290
290
290
350
350
Overall Length (in)
33.7"
33.7"
33.7"
37.2"
37.2"
Diameter (in)
11.4"
11.4"
11.4"
11.4"
11.4"
2-Speed Specs
5DDT
6DDT
7DDT
12DDT
Torque (FT-LBS @ 3000 PSI)
4,067
5,012
6,306
10,310
Max Torque (FT-LBS @ 3500 PSI)
4,745
5,847
7,357
12,028
Recommended Flow (GPM)
10-36
10-36
10-36
10-46
Motor Type
Eaton
Eaton
Eaton
Eaton
Max Pressure (Do Not Exceed)
3500 PSI @ 27 GPM
3500 PSI @ 29 GPM
Max Flow (Do Not Exceed)
53 GPM @ 1800 PSI
53 GPM @ 1950 PSI
Max Horse Power
55
55
55
60
Pressure Relief Valve
Included
Included
Included
Included
Standard Output Shaft
2.5" Hex
2.5" Hex
2.5" Hex
2.5" Hex
Recommended Auger
A6 / RC6
A6 / RC6
A6 / RC6
A8 / RC8
Max Drilling Diameter (Clay / Shale)¹
24"
30"
30"
36"
Max Drilling Diameter (Earth)¹
40"
40"
48"
48"
Weight (lbs.)
350
350
350
376
Overall Length (in.)
34.4"
34.4"
34.4"
35.7"
Diameter (in.)
14.4"
14.4"
14.4"
14.4"
(¹) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
