Filters

Floor Burnishers

3 products

Showing 1 - 3 of 3 products

Showing 1 - 3 of 3 products
View
Save $1,892.06
National Equipment 14500 Propane Burnisher, High Speed - 14500
Save $304.00
National Equipment 14100 Electric Burnisher, 20", 1500 RPM, 1.5 HC - 14100

How does a Floor Burnisher work? 


A floor burnisher is a machine that is used to polish and shine concrete, marble, or other types of flooring. It typically has a spinning head with a very fine abrasive pad or brush attached to it. The machine is pushed across the floor in a back and forth motion, and as it moves, the spinning head polishes the floor surface to a high gloss.

Floor burnishers work by using friction to remove a thin layer of material from the surface of the floor. This process is called abrasion. As the abrasive pad or brush rubs against the floor, it removes a small amount of material, which helps to smooth out any imperfections and create a polished finish.

Floor burnishers are often used in commercial settings, such as supermarkets, hotels, and office buildings, where it is important to maintain a high level of cleanliness and shine on the floor. They are also used in residential settings to polish and restore the finish on concrete or marble floors.


When should you burnish a floor?


There are several situations in which it may be appropriate to burnish a floor:

  1. To restore the finish on a floor: If a floor's finish has become dull or faded, burnishing can help restore the shine and improve the overall appearance of the floor.

  2. To remove scratches or marks: Burnishing can help to remove shallow scratches or marks on the surface of a floor.

  3. To prepare a floor for waxing: Burnishing a floor before waxing can help to create a smoother surface, which will result in a better finish when the wax is applied.

  4. To maintain a high level of shine: Burnishing a floor regularly can help to maintain a high level of shine and keep the floor looking its best.

It is important to note that burnishing should only be done on a floor that is in good condition. If a floor has deep scratches or damage, burnishing may not be effective and it may be necessary to refinish or repair the floor instead.



Benefits of a Floor Burnisher


There are several benefits to using a floor burnisher:

  1. Quick and easy: Burnishing a floor is a quick and easy process that can be completed in a relatively short amount of time.

  2. Improved appearance: Burnishing a floor can help to improve its overall appearance by removing scratches and marks and restoring the shine.

  3. Increased durability: Burnishing a floor helps to create a hard, glossy finish that is more resistant to wear and tear. This can help to extend the life of the floor and reduce the need for repairs.

  4. Increased safety: A shiny, well-maintained floor is less likely to be slippery and can help to reduce the risk of slips and falls.

  5. Improved cleanliness: A burnished floor is easier to clean and maintain, as dirt and debris are less likely to accumulate in the pores of the floor.

  6. Cost-effective: Burnishing a floor is typically less expensive than refinishing or replacing the floor, making it a cost-effective way to maintain and improve the appearance of a floor.



Recently viewed