Bartell Global Shot Blaster, 5HP, 220V, Single Phase - ELEPHANT
For dust free preparation of areas with restricted access. The ELEPHANT is safe and simple to operate with lightweight and compact dimensions. It is ideal for smaller contracts which normally cannot be blasted economically. The design makes it possible to blast almost up to the wall which minimizes handwork and edging - especially in the corners.
Features
The ELEPHANTcan be supplied to operate from 230 V single phase and 400 V three phase power supplies utilizing standard sockets.
The ELEPHANTis designed to complement the established MODUL 200and MODUL 350and is suitable for domestic, commercial and industrial flooring contracts.
The ELEPHANTis also available with Drive Unit.
Light weight - easy transportation (even in a small hatchback)
Ideal for domestic / commercial sites with only 230 V supply e.g. garages, restaurants and offices
Low overall height for work under racking, scaffolding, and benches
Dustless operation with a standard industrial vaccuum
Specifications
ELEPHANT-230
ELEPHANT-400
Working Width
200 mm
200 mm
Voltage
230 V
400 V
Frequency
50 Hz
50 Hz
Phase
1
3
Current Consumption
12 A
5.81 A
Motor Rating
2 kW
3 kW
Motorn nominal Current
12 A
5.18 A
Motor Rotation Speed
2640 rpm
2890 rpm
Weight
84 kg
92 kg
Height
90 cm
90 cm
Length
115 cm
115 cm
Width
40 cm
40 cm
Recommended Dust Collector
CDM 3000
CDM 3000 / CDM 3000-P
Dust Port Diameter
70 mm
70 mm
Accessories
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Tools
Blast Wheel (small)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Shot Cage (small)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot.
The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Bartell Global Shot Blaster, 5HP, 220V, Single Phase - ELEPHANT
For dust free preparation of areas with restricted access. The ELEPHANT is safe and simple to operate with lightweight and compact dimensions. It is ideal for smaller contracts which normally cannot be blasted economically. The design makes it possible to blast almost up to the wall which minimizes handwork and edging - especially in the corners.
Features
The ELEPHANTcan be supplied to operate from 230 V single phase and 400 V three phase power supplies utilizing standard sockets.
The ELEPHANTis designed to complement the established MODUL 200and MODUL 350and is suitable for domestic, commercial and industrial flooring contracts.
The ELEPHANTis also available with Drive Unit.
Light weight - easy transportation (even in a small hatchback)
Ideal for domestic / commercial sites with only 230 V supply e.g. garages, restaurants and offices
Low overall height for work under racking, scaffolding, and benches
Dustless operation with a standard industrial vaccuum
Specifications
ELEPHANT-230
ELEPHANT-400
Working Width
200 mm
200 mm
Voltage
230 V
400 V
Frequency
50 Hz
50 Hz
Phase
1
3
Current Consumption
12 A
5.81 A
Motor Rating
2 kW
3 kW
Motorn nominal Current
12 A
5.18 A
Motor Rotation Speed
2640 rpm
2890 rpm
Weight
84 kg
92 kg
Height
90 cm
90 cm
Length
115 cm
115 cm
Width
40 cm
40 cm
Recommended Dust Collector
CDM 3000
CDM 3000 / CDM 3000-P
Dust Port Diameter
70 mm
70 mm
Accessories
Magnetic Brush
The Magnetic Brush collects any shot which the machine may lose on the floor. The shot can then be used again. The Magnetic Brush is available in two Widths, 50 and 70 cm.
Tools
Blast Wheel (small)
The Blast Wheel in combination with the Shot Cage are the main parts of the shotblaster.
Shot Cage (small)
By turning the Shot Cage the blast pattern can be adjusted
Shot
Different floors need different sizes of shot.
The Technical Data spreadsheet below gives further information about the most common sizes of shot and the applications they are best suited for.
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
