Cantek DC70 Variable Speed Feder, (230/3/60), Universal Stand 7 Roll
Consistent, safe, and powerful power feeder with the right speed for your job.
The Cantek DC70 Short Stock Variable Speed Power Feeder is a patented 7-wheel variable speed power feeder and is the newest power feeder in the award-winning DC series line. For woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders, the DC70 is the perfect fit. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.
Why Cantek DC70 Short Stock Variable Speed Power Feeder?
Ideal for feeding of short material
7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)
Universal stand allows the operator to change the feeder for vertical to horizontal feeding direction or angles as desired
DC brushless servo motor requires 75% less energy with high torque
Infinitely variable feed speed from from 7~86 FPM
Key Advantages
Capable of Feeding Short-Stock Feed shorter parts while maintaining secure hold-down due to the shorter distance between the rollers from center to center
DC Brushless Servo Motor Save over 75% in energy costs while producing similar torque as 1 horsepower AC motor feeders, especially at lower speeds
Instant 90° Memo-Locking Swivel Adjustment Swivel the power feeder and lock it in instantly – perpendicular or parallel to the fence with the memo-locking feature not found on standard stock feeders.
Variable Speed & Digital Controls No more gear change-out. Easily identify your feed rate and change the speed with the turn of a button at 1 fpm increments until you reach your desired speed from 7-86 fpm
Universal Stand The gooseneck attachment on the end of the Power Feeder Stand allows for a quick 90-degree adjustment to position the feeder against the table or at a perfect angle against the fence – No more tinkering around with the joints to make sure it is in perfect position. Also adjust the feeder to incline feed when needed. An incline feeding adjustment indicator helps position the feeder at the desired angle.
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Cantek DC70 Variable Speed Feder, (230/3/60), Universal Stand 7 Roll
Consistent, safe, and powerful power feeder with the right speed for your job.
The Cantek DC70 Short Stock Variable Speed Power Feeder is a patented 7-wheel variable speed power feeder and is the newest power feeder in the award-winning DC series line. For woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders, the DC70 is the perfect fit. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.
Why Cantek DC70 Short Stock Variable Speed Power Feeder?
Ideal for feeding of short material
7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)
Universal stand allows the operator to change the feeder for vertical to horizontal feeding direction or angles as desired
DC brushless servo motor requires 75% less energy with high torque
Infinitely variable feed speed from from 7~86 FPM
Key Advantages
Capable of Feeding Short-Stock Feed shorter parts while maintaining secure hold-down due to the shorter distance between the rollers from center to center
DC Brushless Servo Motor Save over 75% in energy costs while producing similar torque as 1 horsepower AC motor feeders, especially at lower speeds
Instant 90° Memo-Locking Swivel Adjustment Swivel the power feeder and lock it in instantly – perpendicular or parallel to the fence with the memo-locking feature not found on standard stock feeders.
Variable Speed & Digital Controls No more gear change-out. Easily identify your feed rate and change the speed with the turn of a button at 1 fpm increments until you reach your desired speed from 7-86 fpm
Universal Stand The gooseneck attachment on the end of the Power Feeder Stand allows for a quick 90-degree adjustment to position the feeder against the table or at a perfect angle against the fence – No more tinkering around with the joints to make sure it is in perfect position. Also adjust the feeder to incline feed when needed. An incline feeding adjustment indicator helps position the feeder at the desired angle.
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
