Compact design with best-in-class edgebanding result.
The Cantek MX340M Automatic Edgebander is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
Why Cantek MX340M Automatic Edgebander?
Compact design makes it the ideal edgebanding solution for small workshops
Precise adjustments for optimum edge quality
Chain feed system ensures consistent feeding of material for consistent results
Available in 230V 1 or 3 phase
Key Advantages
PLC control system with LED display and keypad
Workpiece is fed by chain
Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
Automatic edge feeding with a thickness capacity of 0.4-3 mm;
Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
2 kg (2.64 lb) Teflon-coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
Heavy duty pressure beam with extendable work-piece support
Heated infeed fence for pre-heating the panel for optimum glue penetration
Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
WORKING UNITS
END TRIM 8800 RPM dual saw blade (80mm / 3.15″) end trimming unit
TOP & BOTTOM TRIM 10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING Radius scraper with 2mm radius knives can be easily excluded when not required
BUFFING 2800 RPM top & bottom buffing units to polish the machined edge
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Compact design with best-in-class edgebanding result.
The Cantek MX340M Automatic Edgebander is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
Why Cantek MX340M Automatic Edgebander?
Compact design makes it the ideal edgebanding solution for small workshops
Precise adjustments for optimum edge quality
Chain feed system ensures consistent feeding of material for consistent results
Available in 230V 1 or 3 phase
Key Advantages
PLC control system with LED display and keypad
Workpiece is fed by chain
Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
Automatic edge feeding with a thickness capacity of 0.4-3 mm;
Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
2 kg (2.64 lb) Teflon-coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
Heavy duty pressure beam with extendable work-piece support
Heated infeed fence for pre-heating the panel for optimum glue penetration
Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
WORKING UNITS
END TRIM 8800 RPM dual saw blade (80mm / 3.15″) end trimming unit
TOP & BOTTOM TRIM 10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING Radius scraper with 2mm radius knives can be easily excluded when not required
BUFFING 2800 RPM top & bottom buffing units to polish the machined edge
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
