[ Call for a Quote ] New Customer Discounts Available! [FREE Shipping in US & Shipping Worldwide]
The PMK C-1205 is the ideal tool for the woodworkers that need to do end-matching on their panels and increase their productivity in the shop, ideal for flooring. Being a direct upgrade to the PMK C-1205, it allows you to work with wider pieces and/or more pieces at once.
Made in the USA, the PMK’s C-1205 Is simple to use and requires little to no experience to work like a professional. It is designed to work with pieces from 2 ¼” to 13 ½” wide by 2” high. Due to the size, you can put several single profile parts together to save time and increase productivity. Not only can you do single sided profiled pieces but you can also do double profiled pieces. On top of that, you can do both male and female pieces. Thanks to its adjustable speed, you can adjust the machine to any thickness and any density while maintaining the piece chip free and since it clamps the piece to the machine, it safely holds it in place regardless of the speed. On top of all of that, the C-1205 has the capacity to stack tooling (maximum two cutters per spindle).
With its simplistic design, the PMK C-1205 is easy for any woodworker to use regardless of skill level while still outputting pieces like a professional.
Terms:
FREE INSTALLATION
FREE SHIPPING IN UNITED STATES
Tooling not included.
Technical Information:
C-1205 PLC MACHINE SPECIFICATIONS
Motor
C-1205 meets UL & CSA Electrical Standards
7.5 hp motor - (please specify your voltage).
@230 volts/30amps
@ 460 volts/20amps
Cutter diameter
Minimum 3.5” OD
Maximum 5” OD
Maximum SIZE part
2” thick
13 ½” wide.
Minimum part length
Minimum thickness
3” Depending on cutter Dimension
5/8”
Maximum cut
¾” depth
Minimum part width
Determined by the O.D. of the cutter and if the part is profiled or not.
Part length
Unlimited
Stack tooling
Two cutters maximum per spindle
Adjustable cycle time
4-10 seconds
THK style rails
Guides carriage stroke and hold-down clamp.
Side pressure clamp
Air Pressure (required)
Insures proper alignment with the fence.
100 PSI, air line 5/8” Día to increase volume
Aluminum Sub-Table for stacking of tooling
Standard equipment which includes second side pressure clamp for use with the sub-table.
Two counter rotating spindles
1 ¼” Diameter – 7000 rpm
Dust Hood
With 5” port
1000 cfm required
C-1205-foot print
Width 60” / Depth 39” / Height 42”
Machine weight
1,352 lbs. (+/-)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
[ Call for a Quote ] New Customer Discounts Available! [FREE Shipping in US & Shipping Worldwide]
The PMK C-1205 is the ideal tool for the woodworkers that need to do end-matching on their panels and increase their productivity in the shop, ideal for flooring. Being a direct upgrade to the PMK C-1205, it allows you to work with wider pieces and/or more pieces at once.
Made in the USA, the PMK’s C-1205 Is simple to use and requires little to no experience to work like a professional. It is designed to work with pieces from 2 ¼” to 13 ½” wide by 2” high. Due to the size, you can put several single profile parts together to save time and increase productivity. Not only can you do single sided profiled pieces but you can also do double profiled pieces. On top of that, you can do both male and female pieces. Thanks to its adjustable speed, you can adjust the machine to any thickness and any density while maintaining the piece chip free and since it clamps the piece to the machine, it safely holds it in place regardless of the speed. On top of all of that, the C-1205 has the capacity to stack tooling (maximum two cutters per spindle).
With its simplistic design, the PMK C-1205 is easy for any woodworker to use regardless of skill level while still outputting pieces like a professional.
Terms:
FREE INSTALLATION
FREE SHIPPING IN UNITED STATES
Tooling not included.
Technical Information:
C-1205 PLC MACHINE SPECIFICATIONS
Motor
C-1205 meets UL & CSA Electrical Standards
7.5 hp motor - (please specify your voltage).
@230 volts/30amps
@ 460 volts/20amps
Cutter diameter
Minimum 3.5” OD
Maximum 5” OD
Maximum SIZE part
2” thick
13 ½” wide.
Minimum part length
Minimum thickness
3” Depending on cutter Dimension
5/8”
Maximum cut
¾” depth
Minimum part width
Determined by the O.D. of the cutter and if the part is profiled or not.
Part length
Unlimited
Stack tooling
Two cutters maximum per spindle
Adjustable cycle time
4-10 seconds
THK style rails
Guides carriage stroke and hold-down clamp.
Side pressure clamp
Air Pressure (required)
Insures proper alignment with the fence.
100 PSI, air line 5/8” Día to increase volume
Aluminum Sub-Table for stacking of tooling
Standard equipment which includes second side pressure clamp for use with the sub-table.
Two counter rotating spindles
1 ¼” Diameter – 7000 rpm
Dust Hood
With 5” port
1000 cfm required
C-1205-foot print
Width 60” / Depth 39” / Height 42”
Machine weight
1,352 lbs. (+/-)
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
The only problem I see with it. Is that the valve that controls the flow of fluid to the chain sometimes loosen up on its on while cutting causing excess fluid to drain out. So I got to keep getting out of the machine to reset the valve.
