Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK
Features:
INTELLISAND™ Technology:Automatically adjusts conveyor speed based on load
Prevents gouging, damaging or burning stock
Provides consistent finish even with varying grain pattern and density
Greatly increases abrasive planing and dimensioning speed
Flatness Guarantee:Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
Abrasive conveyor beltoffers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
Patented Abrasive Attachment Systemeffectively tensions the abrasive wraps, preventing loose abrasive and overlap
Easiest accessto abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools
Self-coolingdrum prevents overheating and extends abrasive life
Tension rollers are adjustablein height and hold down pressure, eliminating snipe
Excellent dust extractionas dust cover is formed to shape of drum
Metal, not plastic, is formed to maximize air flow and dust extraction
Heavy-duty cast ironconstruction for strength, rigidity and reduced vibration
Mobile baseallows for stand and machine to be to moved easily
Additional Details
The 25×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor.
Sanding Capacity
Maximum Width (in): 25″
Minimum Length (in): 3-½″
Maximum Thickness (in): 6″
Minimum Thickness (in): 1/32″
Dimensions (H x W x D):43″ x 46″ x 31″
Drum (Extruded Aluminum):5″ x 25″
Drum Speed:1740 RPM
Dust Hood (Steel Hood, Hinged At Back):(2) 4″ Vacuum Ports, Min CFM: 1000 Recommended
Ball Bearing (1″):4 sealed and permanently lubricated
Conveyor Motor:100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
Drive Motor (TEFC):5 HP, 1 Phase
Power Requirements:208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service