Laguna Tools Industrial Dust Collector - T|Flux: 5 Cyclone
The T|Flux series from Laguna starts to get serious. The Titan cyclones are geared towards clients who desire a single central unit for the entire shop. The T|Flux cyclones are equipped with a 10″ port that splits into 3 x 4″, allowing you to run a large diameter pipe system throughout your shop with drops to the individual stations.
Features
- Motor HP: 5 HP
- 220V, 22.4 Amps, 1 Phase
- 40 AMP Recommended Breaker
- 60 Hertz
- 3450 RPM
- Switch Type: Sunken Radio Frequency Remote switch with LED full drum & LED Filter dirt detection
- Hand Held Remote Control: High Frequency
Additional Details
All models are outfitted with smart drums which alert the user when the drums reach capacity. Automatic canister cleaning is controlled by a timer that turns on every work hour & runs 10 seconds clockwise & counter clockwise. The 1 micron canister has a huge surface area and filtrates 99.97% of particles ranging from 0.2 to 2 microns. Smart Drums comes standard with high quality casters and feature our unique quick disconnect design.
Specifications
- Shop Setting CFM*: 2450
- Inlet CFM: 4295
- Max Static Pressure (Inches of Water): 12.1″
- Impeller/Fan Size: 16″
- Impeller Material: Steel
- Impeller Type: Radial Fin
- Balanced To: ISO 1940
- Inlet Diameter: 10″
- Drum Capacity: 54 Gal
- Octagon Drum: Low Pressure Suction
- Drum Collection Bag (Dia. x L): Plastic Bag (740 x 1300mmL)
- Canister Filter Type: Black 1 Micron
- Filtration Efficiency: 1.2-2 Micron @ 99.97%
- MERV Rating: 12
- Canister Diameter: 600mm (23.62″)
- Canister Length: 1200mm (47.24″)
- Filter Surface Area: 15m²/162ft²
- Canister Cleaning: Auto Clean (Gear Motor)/ Cleans every hour 10 sec clockwise, 10 sec counter-clockwise
- Canister Filter Lower Dust Collection: Plastic Bag (610 x 600mmL)
- Wheels: None
- US/CSA Approved: Yes
- Decibel Reading: 76dB(A)(@9.8ft)
- Machine Weight: 325 kgs/717 lbs
- Shipping Weight: 430 kgs / 948 lbs
- Shipping Dimensions (L x W x H): 75″ x 39″ x 80″
- Assembled Dimensions (L x W x H): 73″ x 39″ x 111″ (1845 x 989 x 2810mm)
Performance
Dimensions
Manual
WHICH LAGUNA CNC MACHINE IS RIGHT FOR YOU?
Woodworking CNC Machines
Industry-Leading woodworking machinery. Laguna CNC machines were designed & developed from extensive knowledge. Laguna Tools offers CNC Routers, CO2 Lasers, Edgebanders, CNC Turners & Joinery Machines, for your woodshop.
Laguna CNC machines work with the following materials: soft & hardwood, hard plastic, acrylic, non-ferrous metals such as aluminum, brass, copper, high-density foam & more.
Metalworking CNC Machines
Our state-of-the-art and easy-to-use metalworking CNC machines cut metal with ease and precision. Laguna offers an extensive line of Plasma Cutters, Fiber Lasers, Engravers & Metal Sanding Machines to fit any metal shop.
Laguna Metalworking CNC Machines work with ferrous metals such as iron, stainless steel, alloys, low medium & high carbon steel.
Multi-Tool CNC Machines
With spindles for routing & several knife cutting options, our Laguna Multi-Purpose CNC Machines work with a variety of materials from soft foam to hardwood. Ideal for any shop, our Multi-Tool CNC including the SmartShop 5-Axis Machine is hands down the best you can get.
Laguna Multi-Tool machines work with wood; plastic; vinyl; leather; fabric; soft, medium, and hard foam; as well as non-ferrous metals.
CNC Limited Warranty
New CNC machines sold by Laguna Tools carry a one-year warranty effective from the date of shipping. Laguna Tools guarantees all new machines sold to be free of manufacturers’ defective workmanship, parts, and materials. We will repair or replace without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect.
- We require that the defective item/part is determined to be damaged due to lack of maintenance, cleaning, or misuse/abuse, the customer will be responsible for the cost to replace the item/part, plus all related shipping charges.
- This limited warranty does not apply to natural disasters, acts of terrorism, normal wear and tear, product failure due to lack of maintenance or cleaning, damage caused by accident, neglect, lack of or inadequate dust collection, misuse/abuse or damage caused where repair or alterations have been made or attempted by others.
- Laguna Tools, Inc. is not responsible for additional tools or modifications sold or performed (other than from/by Laguna Tools, Inc.) on any Laguna Tools, Inc. woodworking machine.
- Warranty may be voided upon the addition of such described tools and/or modifications, determined on a case-by-case basis.
- Software purchased through Laguna Tools, Inc., is not covered under this warranty and all technical support or licensing must be managed through the software provider.
- Normal user alignment, adjustment, tuning, and machine settings are not covered by this warranty. It is the responsibility of the user to understand basic woodworking machinery settings and procedures and to properly maintain the equipment in accordance with the standards provided by the manufacturer.
- Laguna Tools is not responsible for lost earnings due to a machine being inoperative or in need of repair.
- Spindles and bearings are not covered due to severe conditions or operating outside the duty cycle.
- Parts under warranty are shipped at Laguna Tools, Inc.’s cost either by common carrier, FedEx ground service or a similar method. Technical support to install replacement parts is primarily provided by phone, fax, e-mail, or Laguna Tools Customer Support Website.
- The labor required to install replacement parts is the responsibility of the user.
- Laguna Tools is not responsible for damage or loss caused by a freight company or other circumstances not in our control. All claims for loss or damaged goods must be notified to Laguna Tools within twenty-four hours of delivery.
Laser warranty exclusions:
- Damage to head, or Optic cable due to lack of volume or contaminated assist gas.
- Damage to components from misuse or lack of maintenance and cleaning.
- Operation of the machine by untrained employees.
- Operating the machine outside of its capabilities or beyond its duty cycle.
- Failure to use Distilled or deionized water will void warranty of power supply, chiller, and head.
- Optic failure due to back reflection errors will void power supply and Optic warranty.
- The machine must be kept and operated in a proper environment to maintain warranty.
CO2 Laser Warranty
- This warranty extends only to products distributed and/or sold by Laguna Tools to the original purchaser only.
- Any after-market additions or modifications will not be warranted. The laser machine system owner is responsible for any service and repairs outside the scope of this warranty
- This warranty covers only the normal use of the laser machine. Laguna Tools shall not be liable under this warranty if any damage or defect results from (i) *Irresponsible use, abuse, neglect, accidental damage, improper return shipping or installation (ii) Disasters such as fire, flood, lightning, or improper electric current (iii) Service or alteration by anyone other than an authorized Laguna Tools representative *Damages incurred through irresponsible use may include but are not limited to (i) Failure to turn ON or use clean water within the chiller (ii) Failure to clean optical mirrors and lenses (iii) Failure to clean or lube guide rails with lubricant oil (iv) Failure to remove or clean debris from collection tray (v) Failure to properly store the laser in a properly conditioned environment.
- Laguna Tools accepts no responsibility for any software programs, data, or information stored on any media or any parts of any products returned for repair to Laguna Tools.
- This warranty does not cover any third-party software or virus-related problems not purchased from Laguna Tools.
- Laguna Tools is not responsible for loss of data or time, even with hardware failure. Clients are responsible for backing up any data for their own protection. Laguna Tools is not responsible for any loss of work (“downtime”) caused by a product requiring service.
- Laguna Tools is a support-driven company. We continue to extend FREE tech support for life to the original clients. An annual fee will be charged to support resales (in the event the client resells the machine). The Warranty, however, is non-transferable.
- Laguna Tools agrees to absorb Ground Shipping Costs for Warranty Replacement Items. We offer the ability for clients to upgrade to expedited shipping for the cost difference, which will be invoiced and charged to the client prior to shipment.
- International shipping costs and/or customs fees associated with fulfillment of Warranty Replacement Items are the responsibility of the client.
- Laguna Tools at its own discretion reserves the right to deny the purchase of any extended warranty.
AFTER TWO-YEAR WARRANTY: POST WARRANTY SUPPORT AND/OR REPAIRS Laguna Tools offers free lifetime tech support via. phone and email to the original purchaser. However, after two (2) years replacement parts will be the responsibility of the client including shipping charges. Laguna Tools will provide a quote for the necessary parts and repairs.
Who is Laguna Tools?
We are the people we employ, the products we sell and the passion to serve our customers that emanates from both.
Laguna Tools was born in Laguna Beach, California in 1983, out of a desperate need to find safe, quality and precise woodworking machines for Torben Helshoj’s custom woodworking shop in Laguna Canyon. The tools that his partners used did not meet the high standards that Torben had used in Denmark, where he earned the Queen of Denmark’s Silver Medal in woodworking.
Armed with the experience from his four-year furniture making apprenticeship Torben returned to Europe with his business partners to purchase machines that would improve the quality of cuts and improve inefficiencies.
Laguna Tools forged a partnership with Robland Machines International to import high-end, superior quality woodworking machines and over the next decade the company became the number one importer of combination machinery in the US.
Now, over three decades later, Laguna Tools is still a corporation with the same values of quality, accuracy and safe products and that also focuses on their customers and their needs.
While we started off as a leader in the woodworking industry, we have now applied our innovative ideas to the metal, plastics, signs and composite businesses.
We do everything with one goal in mind — to help our customers build personal success stories.
We sell solutions.
Downloads
Automated Machines
iQ Series
Fiber Lasers
Specialty Machines
Swift Series
Plasma Series
CO2 Lasers
SmartShop®
CNC Turner Series
Industrial Machines
Bandsaws
Desktop CNC
Planers
Tablesaws
Metal Sanders
Wood Sanders
Dust Collectors
Shapers
Panelsaws
Jointers
Speciality Machines
SuperBrushes®
Classic Machines
Bandsaws
Lathes
Shapers
Tablesaws
Dust Collectors
Planers
Jointers
Sanders
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recently viewed
