The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.
Inside the P12|10 you will find the saw unit is moving on micro-polished solid steel rods for ultimate precision.
The heavy duty motor is equipped with soft start to minimize initial amperage draw.
The P12|10 comes standard with hold-down clamp, rip shoe and push handle.
Specifications
-
Arbor: 30mm(Main), 20mm (Scoring)
-
Max Cutting Height 90° 14″/355mm Blade: 4-½″ (115mm)
-
Max Cutting Height 90° 16″/400mm Blade: 5-⅛″ (130mm)
-
Max Cutting Height 45° 14″/355mm Blade: 2-¾″ (70mm)
-
Max Cutting Height 45° 16″/400mm Blade: 3-½″ (90mm)
-
Main Blade Speed: 4000 RPM
-
Scoring Blade Speed: 8000 RPM
-
Dust Collection Port Saw: 4¾″ (120mm)
-
Dust Collection Port Guard: 4″ (100mm)
-
Sliding Table: 126″ (3200mm)
-
Sliding Table Width: 14.88″ (378mm)
-
Main Cast Table: 21-½″ x 35-¼″
-
Rip Fence: 51″ (1300mm)
-
Rip Fence Micro Adjust: Included
-
Rip Fence Bar: 1-⅝″ (40mm) Solid Steel Micro Polished
- Overhead Guard With Swing-Away
-
Push Handle: Included
-
Rip Shoe: Included
-
Hold Down Clamp: Included
-
Crosscut Fence: 2 x Flip-Stops
-
Crosscut Fence Readout: Inch/Metric
-
Crosscut Fence Max Collapsed: 77″
-
Crosscut Fence Max Extended: 140″
-
Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
-
Ship Dimensions Body: 83″ x 47″ x 46″
-
Ship Dimensions Table: 137″ x 20″ x 15″
-
Weight (Net/Ship): 1815/2112 lbs
Manual
WHICH LAGUNA CNC MACHINE IS RIGHT FOR YOU?
Woodworking CNC Machines
Industry-Leading woodworking machinery. Laguna CNC machines were designed & developed from extensive knowledge. Laguna Tools offers CNC Routers, CO2 Lasers, Edgebanders, CNC Turners & Joinery Machines, for your woodshop.
Laguna CNC machines work with the following materials: soft & hardwood, hard plastic, acrylic, non-ferrous metals such as aluminum, brass, copper, high-density foam & more.
Metalworking CNC Machines
Our state-of-the-art and easy-to-use metalworking CNC machines cut metal with ease and precision. Laguna offers an extensive line of Plasma Cutters, Fiber Lasers, Engravers & Metal Sanding Machines to fit any metal shop.
Laguna Metalworking CNC Machines work with ferrous metals such as iron, stainless steel, alloys, low medium & high carbon steel.
Multi-Tool CNC Machines
With spindles for routing & several knife cutting options, our Laguna Multi-Purpose CNC Machines work with a variety of materials from soft foam to hardwood. Ideal for any shop, our Multi-Tool CNC including the SmartShop 5-Axis Machine is hands down the best you can get.
Laguna Multi-Tool machines work with wood; plastic; vinyl; leather; fabric; soft, medium, and hard foam; as well as non-ferrous metals.
CNC Limited Warranty
New CNC machines sold by Laguna Tools carry a one-year warranty effective from the date of shipping. Laguna Tools guarantees all new machines sold to be free of manufacturers’ defective workmanship, parts, and materials. We will repair or replace without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect.
- We require that the defective item/part is determined to be damaged due to lack of maintenance, cleaning, or misuse/abuse, the customer will be responsible for the cost to replace the item/part, plus all related shipping charges.
- This limited warranty does not apply to natural disasters, acts of terrorism, normal wear and tear, product failure due to lack of maintenance or cleaning, damage caused by accident, neglect, lack of or inadequate dust collection, misuse/abuse or damage caused where repair or alterations have been made or attempted by others.
- Laguna Tools, Inc. is not responsible for additional tools or modifications sold or performed (other than from/by Laguna Tools, Inc.) on any Laguna Tools, Inc. woodworking machine.
- Warranty may be voided upon the addition of such described tools and/or modifications, determined on a case-by-case basis.
- Software purchased through Laguna Tools, Inc., is not covered under this warranty and all technical support or licensing must be managed through the software provider.
- Normal user alignment, adjustment, tuning, and machine settings are not covered by this warranty. It is the responsibility of the user to understand basic woodworking machinery settings and procedures and to properly maintain the equipment in accordance with the standards provided by the manufacturer.
- Laguna Tools is not responsible for lost earnings due to a machine being inoperative or in need of repair.
- Spindles and bearings are not covered due to severe conditions or operating outside the duty cycle.
- Parts under warranty are shipped at Laguna Tools, Inc.’s cost either by common carrier, FedEx ground service or a similar method. Technical support to install replacement parts is primarily provided by phone, fax, e-mail, or Laguna Tools Customer Support Website.
- The labor required to install replacement parts is the responsibility of the user.
- Laguna Tools is not responsible for damage or loss caused by a freight company or other circumstances not in our control. All claims for loss or damaged goods must be notified to Laguna Tools within twenty-four hours of delivery.
Laser warranty exclusions:
- Damage to head, or Optic cable due to lack of volume or contaminated assist gas.
- Damage to components from misuse or lack of maintenance and cleaning.
- Operation of the machine by untrained employees.
- Operating the machine outside of its capabilities or beyond its duty cycle.
- Failure to use Distilled or deionized water will void warranty of power supply, chiller, and head.
- Optic failure due to back reflection errors will void power supply and Optic warranty.
- The machine must be kept and operated in a proper environment to maintain warranty.
