Lincoln Power MIG 180 Dual Voltage 110/230V MIG Welder - K3018-2

POWER MIG® 180 Dual MIG welder has dual 120 or 208/230 volt input power capability for MIG and flux cored wire welding. The Power MIG 180 Dual MIG Welder (K3018-2) is being fully replaced by the Power MIG 211i (K6080-1). Limited supply available. Please check with local retailer or distributor for availability.

POWER MIG.® The Professional’s Choice^SM
Have it both ways with the POWER MIG® 180 Dual wire welder. With dual 120 or 208/230 volt input power capability, you can use the same machine to weld at home, in the shop or out on the job site. It’s a great choice for sheet metal and light frame autobody work, farm or small shop applications.

• Dual Input Power Capability - Select 120 volt input power for home and generator-driven environments or choose 208/230 volt input power for shop applications on thicker materials.
• Industrial Cast Aluminum Drive - Dual gear-driven drive rolls deliver positive traction. Patented split wire guides ensure optimal wire alignment and a brass-to-brass gun connection aids critical conductivity. A large industrial closed-design drive motor improves torque and enhances trouble-free performance.
• Diamond Core Technology™ - Delivers a forgiving arc, excellent out-of-position arc action, low spatter and a wide voltage sweet spot at a given wire feed speed for steel, stainless steel and aluminum.
• Spool Gun Ready - Just remove the standard MIG gun and plug in the economical Magnum® PRO 100SG spool gun (optional) for enhanced aluminum wire feeding performance.
• No Hassle Tool-less Design - For input power changes, wire spool mounting, wire drive service and polarity changes.

Features

• Dual Input Power Capability - Select 120 or 208/230 volt input power
• Industrial Cast Aluminum Drive - Dual gear-driven drive rolls deliver positive traction.
• Diamond Core Technology™ - Delivers a forgiving arc, excellent out-of-position arc action, low spatter and a wide voltage sweet spot
• Spool Gun Ready - Just remove the standard MIG gun and plug in the economical Magnum® PRO 100SG spool gun
• No Hassle Tool-less Design For input power changes, wire spool mounting, wire drive service and polarity changes.

What's Included

• Magnum® PRO 100L Gun 10 ft (3.0 m
• 120V and 230V Input Cables
• Input Cable Bag
• Gas and Gasless Nozzles
• Gun Cable Liner (Pre-Installed in Gun)
• Learn-To-Use DVD
• Work Cable and Clamp
• Adjustable Gas Regulator and Hose
• Spindle Adapter
• Sample Spool (0.90 kg) Spool of SuperArc® L-56® Mild Steel MIG Wire
• Sample Spool (0.45 kg) Spool NR®-211-MP Flux-Cored Wire
• (3) .025 in (0.6 mm) Contact Tips (KH710)
• (3) .035 in. (0.9 mm) Contact Tips (KH712)
• .025 - .030 in (0.6 - 0.8 mm) and .035 in (0.9 mm) Drive Rolls
• .030 - .045 in (0.8 - 1.1 mm) Knurled Drive Rolls
• .025 - .035 in (0.6 - 0.9 mm)
• .045 (1.1 mm) Wire Guides

Specifications

Downloads

• POWER MIG 180 Dual Product Info

CAD Files

• K3018-1.stp

• K3018-1.x_t

FAQs

What arc welding processes are simulated by the VRTEX®
The VRTEX® 360 simulates the SMAW (E6010, E6013, and E7018), GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.

The VRTEX® Mobile simulates the GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.  SMAW (E6010, E6013, and E7018) is an optional hardware and software kit.

SMAW (Optional on VRTEX® Mobile)

• E6010 (Fleetweld®® 5P+)
• E7018 (Excalibur® 7018)
• E6013 (Fleetweld® 37)

GMAW

• Short Arc (.035” SuperArc® L-56)
• Axial Spray (.045” SuperArc® L-56)
• Pulse (.045” SuperArc® L-56)
• STT® Surface Tension Transfer® (.045” SuperArc® L-56)

FCAW

• Gas-shielded .045 “ (UltraCore® 71A85)
• Self-Shielded 5/64” (Innershield® NR-232)

What type of weld joint configurations can I use with the system?
The VRTEX® 360 comes with 5 welding coupons (Flat Plate, Tee Joint, Groove Joint, 2″ XXS Pipe and 6″ Sch 40 pipe) that can be used in multiple positions.

The VRTEX® Mobile comes with 3 welding coupons (Flat Plate, Tee Joint, Groove Joint) that can be used in limited positions.

What positions can I put the VR coupons in?
The VRTEX® 360 supports all positions:

• Plate: Flat, Horizontal, Vertical and Overhead
• Pipe: 2G, 5G and 6G
• The VRTEX® Mobile supports limited positions:
• Plate: Flat, Horizontal and Vertical

Can I run the VRTEX® software on my own computer?
No. The VRTEX® uses an advanced computer system and specialized peripheral equipment to allow the simulation to run smoothly. The system comes with a computer that has been optimized for the needs of the simulation software and peripheral equipment that allows the simulation to work properly.

How can the VRTEX® turn my welding program green?
The VRTEX® system makes it possible to learn how to weld in an eco-friendly manner. Instructors who use virtual reality training will minimize their material waste and environmental footprint. The product teaches welding without the use of shielding gas, welding electrodes or welding coupons and does not require weld fume removal. It also reduces the disposal of waste as a result of training such as base material, consumable parts, etc. The VRTEX® also allows students to be taught with a reduction in overall energy consumption by requiring less energy than a traditional welding machine, feeder and weld fume control system.

Can I use different welding techniques (drag, push, whip, weave, etc.)?
The VRTEX® can be set up by the instructor to accommodate many types of welding techniques such as:

• Push and drag GMAW techniques
• Stringer beads
• Weave techniques – straight, triangle and box weave

How can I save my students’ weld reports?
A USB memory device is inserted into the front of the VRTEX® 360 and the VRTEX® Mobile to collect reports. When the student presses the “End pass” button, the weld information is saved as a .pdf file onto the device. The student reports include all of the information shown on the graphing screen.

How do I integrate this system into my current welding curriculum?
Lincoln Electric's New Lesson’s in VRAW™ Virtual Reality Arc Welding is an integrated approach that blends virtual reality with traditional methods. Please contact us at vrtex@lincolnelectric.com for more details.

Can I run multiple virtual arcs off of one system?
No, one virtual arc per system, similar to a standard welding machine. To maximize the use of the system, many schools currently implementing VR welding training, station two students on the system at a time with one in a coaching role and the other practicing their welding technique. The students are then rotated through the VR Welding lab.

Can I ‘stick’ my electrode?
No. The system does not simulate sticking of the electrode or wire push back due to excessive CTWD. However, the system will not allow the student to weld when a very short arc length or excessive CTWD is used. Students are encouraged to learn about these welding situations as well as the troubleshooting of welding equipment welding through real welding experience.

What languages does the VRTEX® support?
The VRTEX® 360 system includes language support for English, Spanish, French, German, Turkish, Japanese, and Mandarin Chinese.

Recently released! The VRTEX® has now expanded language support for Portuguese (Brazilian) and Russian.

What is the input power and current?
Input power: 115/230/1/50/60

Input current: 4A @ 115, 2A @ 230

Does the VRTEX® require any special set-up and installation procedures?

• The VRTEX® system requires a space of 8’ L x 8’ D x 8’ H (2.4 m x 2.4 m x 2.4 m).
• When operating multiple units in one location, alternate between standard and alternate frequency systems (unique part numbers are identified).
• The VRTEX® system is not designed for operation in harsh environments. Recommendations are listed in the instruction manual.
• Avoid magnetic fields, conductive and high frequency objects and processes.
• An uninterruptible power supply (UPS) may be required for protection of the system from power irregularities and/or disruptions