Lincoln Power MIG 256 One-PAK Magnum 250LX SG - K3069-1

POWER MIG® 256 welder performs MIG and flux-cored welding in light industrial job shop fabrication, maintenance or repair work.

POWER MIG.® The Professional’s Choice^SM

The POWER MIG® 256 sets the standard for MIG and flux-cored welding in light industrial job shop fabrication, maintenance or repair work.

• Diamond Core Technology™ - Delivers a forgiving arc, excellent out-of-position arc stability, low spatter and a wide voltage
  sweet spot at a given wire feed speed for steel, stainless steel or aluminum.
• MAXTRAC® cast aluminum industrial wire drive - Features dual driven rolls, regulated wire feed speed control, brass-to-brass
  connections and Lincoln’s 100% wire supporting split wire guide system.
• Digital meters - For set up, meters display your preset voltage and wire feed speed. During welding, actual voltage is displayed.
• New! Magnum® PRO gun and cable 15 ft. (4.5 m) - Makes it easy to reach your work.
• Copper Plus™ contact tips - Larger tip diameter and mass improves heat dissipation to increase tip life.
• Add a spool gun - The POWER MIG® 256 is spool gun ready for the premium Magnum® 250LX gun and spool gun capable with the
  Magnum® SG (requires adapter).
• 115V auxiliary receptacle - (208/230V model only) to power a grinder or other auxiliary equipment in your work area.
• New! Great value-adding features -
  
  • Coil Claw™ Cable Management system keeps your workstation organized.
  • Convenient top-mounted gun expendables tray.
  • All metal case front.

NOTE: The POWER MIG® 256 cannot be powered by an engine-driven welder.

Features

• Diamond Core Technology™ - Delivers a forgiving arc
• MAXTRAC® cast aluminum industrial wire drive - Features dual driven rolls
• Digital meters - For set up, meters display Your preset voltage and wire feed speed. During welding, actual voltage is displayed.
• Magnum® PRO gun and cable 15 ft. (4.5 m) - Makes it easy to reach your work.
• Copper Plus® contact tips - Larger tip diameter and mass improves heat dissipation to increase tip life.

What's Included

• (1) POWER MIG 256 MIG Welder
• (1) K3081-2 Magnum® PRO 250L Gun Cable Assembly 15 ft
• (1) K1702-1 Dual Cylinder Mounting Kit
• (1) K3570-2 Magnum® PRO 250LX Spool Gun
• (1) K86-1 Flowgauge Regulator Kit
• (1) Top-Mounted Gun Expendables Tray
• (1) Built-In Undercarriage with Easy-Load Gas Cylinder Platform
• (1) Work Clamp and 10 ft (3.0 m) Cable
• (1) 230V Input Power Cable with Plug 10 ft
• (1) Drive Roll .035-.045 in
• (1) Wire Guide .035-.045 in
• (1) Gas Regulator and Hose Kit for Argon Blend Gases
• (1) Large Color Coded Procedure Recommendation Sheet

Specifications

Downloads

• POWER MIG 256 Product Info

FAQs

What arc welding processes are simulated by the VRTEX®
The VRTEX® 360 simulates the SMAW (E6010, E6013, and E7018), GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.

The VRTEX® Mobile simulates the GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.  SMAW (E6010, E6013, and E7018) is an optional hardware and software kit.

SMAW (Optional on VRTEX® Mobile)

• E6010 (Fleetweld®® 5P+)
• E7018 (Excalibur® 7018)
• E6013 (Fleetweld® 37)

GMAW

• Short Arc (.035” SuperArc® L-56)
• Axial Spray (.045” SuperArc® L-56)
• Pulse (.045” SuperArc® L-56)
• STT® Surface Tension Transfer® (.045” SuperArc® L-56)

FCAW

• Gas-shielded .045 “ (UltraCore® 71A85)
• Self-Shielded 5/64” (Innershield® NR-232)

What type of weld joint configurations can I use with the system?
The VRTEX® 360 comes with 5 welding coupons (Flat Plate, Tee Joint, Groove Joint, 2″ XXS Pipe and 6″ Sch 40 pipe) that can be used in multiple positions.

The VRTEX® Mobile comes with 3 welding coupons (Flat Plate, Tee Joint, Groove Joint) that can be used in limited positions.

What positions can I put the VR coupons in?
The VRTEX® 360 supports all positions:

• Plate: Flat, Horizontal, Vertical and Overhead
• Pipe: 2G, 5G and 6G
• The VRTEX® Mobile supports limited positions:
• Plate: Flat, Horizontal and Vertical

Can I run the VRTEX® software on my own computer?
No. The VRTEX® uses an advanced computer system and specialized peripheral equipment to allow the simulation to run smoothly. The system comes with a computer that has been optimized for the needs of the simulation software and peripheral equipment that allows the simulation to work properly.

How can the VRTEX® turn my welding program green?
The VRTEX® system makes it possible to learn how to weld in an eco-friendly manner. Instructors who use virtual reality training will minimize their material waste and environmental footprint. The product teaches welding without the use of shielding gas, welding electrodes or welding coupons and does not require weld fume removal. It also reduces the disposal of waste as a result of training such as base material, consumable parts, etc. The VRTEX® also allows students to be taught with a reduction in overall energy consumption by requiring less energy than a traditional welding machine, feeder and weld fume control system.

Can I use different welding techniques (drag, push, whip, weave, etc.)?
The VRTEX® can be set up by the instructor to accommodate many types of welding techniques such as:

• Push and drag GMAW techniques
• Stringer beads
• Weave techniques – straight, triangle and box weave

How can I save my students’ weld reports?
A USB memory device is inserted into the front of the VRTEX® 360 and the VRTEX® Mobile to collect reports. When the student presses the “End pass” button, the weld information is saved as a .pdf file onto the device. The student reports include all of the information shown on the graphing screen.

How do I integrate this system into my current welding curriculum?
Lincoln Electric's New Lesson’s in VRAW™ Virtual Reality Arc Welding is an integrated approach that blends virtual reality with traditional methods. Please contact us at vrtex@lincolnelectric.com for more details.

Can I run multiple virtual arcs off of one system?
No, one virtual arc per system, similar to a standard welding machine. To maximize the use of the system, many schools currently implementing VR welding training, station two students on the system at a time with one in a coaching role and the other practicing their welding technique. The students are then rotated through the VR Welding lab.

Can I ‘stick’ my electrode?
No. The system does not simulate sticking of the electrode or wire push back due to excessive CTWD. However, the system will not allow the student to weld when a very short arc length or excessive CTWD is used. Students are encouraged to learn about these welding situations as well as the troubleshooting of welding equipment welding through real welding experience.

What languages does the VRTEX® support?
The VRTEX® 360 system includes language support for English, Spanish, French, German, Turkish, Japanese, and Mandarin Chinese.

Recently released! The VRTEX® has now expanded language support for Portuguese (Brazilian) and Russian.

What is the input power and current?
Input power: 115/230/1/50/60

Input current: 4A @ 115, 2A @ 230

Does the VRTEX® require any special set-up and installation procedures?

• The VRTEX® system requires a space of 8’ L x 8’ D x 8’ H (2.4 m x 2.4 m x 2.4 m).
• When operating multiple units in one location, alternate between standard and alternate frequency systems (unique part numbers are identified).
• The VRTEX® system is not designed for operation in harsh environments. Recommendations are listed in the instruction manual.
• Avoid magnetic fields, conductive and high frequency objects and processes.
• An uninterruptible power supply (UPS) may be required for protection of the system from power irregularities and/or disruptions