Professional welder/generator built with an EFI (Electronic Fuel Injection) engine to provide powerful multi-purpose stick, MIG, TIG and pipe welding capabilities.
Features
A WELDER FOR ALL SEASONS
Make the Ranger 305 G your portable welding station - general stick and downhill pipe, Touch Start™ TIG, MIG, and flux-cored wire capability. Choose the Ranger 305 G EFI (electronic fuel injection) for easier starts in cold weather and lower fuel consumption, with no choke starting required. The 9,500 watt continuous single-phase AC generator powers motors starting, tools and inverter welders for extended range and process capability.
- Digital weld meters monitor actual welding output
- 12-gallon fuel capacity allows for extended operation
- Electric fuel pump helps avoid vapor lock during high-altitude operation
Kohler® Gasoline Engine
· 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use!
· Electric fuel pump to avoid vapor lock at high altitude operation.
Multi-Process Welding
· Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire and MIG (CO2 and mixed gas).
· Only compact gasoline welder in North America rated at 29V for 300 amps of stick or CV welding.
· CV wire welding with up to 5/64 in. (2.0 mm) diameter electrodes.
Digital Weld Meters
· Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output.
Superior Arc Performance
· Lincoln Electric Chopper Technology® - provides easy starts, a smooth arc, low spatter and optimal bead appearance.
Peak Single-Phase AC Generator Power for Motor Starting
· 12,000 watts peak
· 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Lincoln Electric Invertec® inverter welder. Also use for lights, a grinder or other power tools.
· AC generator voltage is constant at 120V or 240V at any weld dial setting.
Rugged Reliability
· Welding and AC Generator Outputs rated at 104ºF (40ºC).
Additional Features
- Kohler® Gasoline Engine - 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use!
- Multi-Process Welding - Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging.
- Digital Weld Meters - makes it easy to precisely pre-set Your procedures and monitor actual welding output.
- Superior Arc Performance - Lincoln Chopper Technology® provides easy starts, a smooth arc, low spatter and excellent bead appearance.
What's Included
- (1) Ranger 305 G EFI Engine Driven Welder
Specifications
Product Weights & Dimensions
| Dimensions (H x W x D) | 30 in x 21.5 in x 42.3 in (762 mm x 546 mm x 1073 mm) |
| Net Weight | 510 lbs (231 kg) |
Machines
| Machines Processes | Stick (SMAW) Gouging (CAC-A) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| Max Rating | 305A / 29V / 100% @ 104°F (40°C) |
| Output Range by Mode | CC-Stick: 20– 305 A Downhill Pipe (CC): 40-300 A Touch Start TIG: 20 – 250 A CV-Wire: 14 – 29 V Arc Gouging: 90 – 300 A |
| Rated Gouging Carbon Diameter | 5/32 in (4.0 mm) |
Engine Driven Welders
| Single Phase Auxiliary Output | 9,500 Watts Continuous, 120/240V |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 14-50R |
| Engine Brand & Model | Kohler OHV Command ECH740 |
| Engine Description | 2 Cylinder Air-Cooled Gasoline Engine |
| Engine Horsepower | 25 HP |
| High Idle Operating Speed @ Rated Output | 3600 |
| Fuel Tank Size (US gal.) | 12 |
| Fuel Tank Size (L) | 45.4 |
| Oil Capacity (qts.) | 2.0 |
| Oil Capacity (L) | 1.9 |
Application
| Typical Application | Construction Construction & Field Erection General Fabrication Maintenance & Repair Repair Welding Structural Fabrication Structural Welding |
Warranty
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |
Downloads
CAD Files
FAQs
The VRTEX® Mobile simulates the GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system. SMAW (E6010, E6013, and E7018) is an optional hardware and software kit.
SMAW (Optional on VRTEX® Mobile)
- E6010 (Fleetweld®® 5P+)
- E7018 (Excalibur® 7018)
- E6013 (Fleetweld® 37)
GMAW
- Short Arc (.035” SuperArc® L-56)
- Axial Spray (.045” SuperArc® L-56)
- Pulse (.045” SuperArc® L-56)
- STT® Surface Tension Transfer® (.045” SuperArc® L-56)
FCAW
- Gas-shielded .045 “ (UltraCore® 71A85)
- Self-Shielded 5/64” (Innershield® NR-232)
The VRTEX® Mobile comes with 3 welding coupons (Flat Plate, Tee Joint, Groove Joint) that can be used in limited positions.
- Plate: Flat, Horizontal, Vertical and Overhead
- Pipe: 2G, 5G and 6G
- The VRTEX® Mobile supports limited positions:
- Plate: Flat, Horizontal and Vertical
- Push and drag GMAW techniques
- Stringer beads
- Weave techniques – straight, triangle and box weave
Recently released! The VRTEX® has now expanded language support for Portuguese (Brazilian) and Russian.
Input current: 4A @ 115, 2A @ 230
- The VRTEX® system requires a space of 8’ L x 8’ D x 8’ H (2.4 m x 2.4 m x 2.4 m).
- When operating multiple units in one location, alternate between standard and alternate frequency systems (unique part numbers are identified).
- The VRTEX® system is not designed for operation in harsh environments. Recommendations are listed in the instruction manual.
- Avoid magnetic fields, conductive and high frequency objects and processes.
- An uninterruptible power supply (UPS) may be required for protection of the system from power irregularities and/or disruptions
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recently viewed
