Miller ArcReach Suitcase 8 w/Flux Cored Gun (951728)
The Miller ArcReach Suitcase 8 feeder allows the operator to adjust the output voltage at the feeder, saving a trip back to the power supply - no extra control cable to purchase. ArcReach equipped power sources and wire feeders work with non-ArcReach equipment, however the complete benefits are only realized with the ArcReach system.
Product Video
Features
ArcReach Suitcase Features • Electronic wire feed speed with control tachometer • Digital meters with sunvision technology • Front panel has trigger hold, wire jog, and gas purge • Ability to change wire with feeder in upright position • Dual schedule capable (dual schedule switch sold separately) • Gun locking tab prevents gun from being pulled out prematurely • Recessed gas inlet on rear of case
Quick Specs • Input Power: 14-48 VDC operating range • Wire Feed Speed: 50-780 ipm • Duty Cycle: 60% @ 330A • Wire Diameter Capacity: .023 - .052 Solid Wire | .030 - 5/64 Flux Cored • Max Wire Diameter: 8" or 14lb Spool • Dims: 15.5" H x 9" W x 21" D • Weight: 28lbs
Processes
Flux Cored (FCAW)
MIG (GMAW)
Processes
Flux Cored (FCAW)
MIG (GMAW)
General Specifications
Title
ArcReach® SuitCase® 8, Bernard™ Dura-Flux Gun Pkg
Wire Feed Speed
1.3 m/min - 19.8 m/min 50 IPM - 780 IPM
Wire Diameter
Solid Steel 0.6 mm. - 1.4 mm. Solid Steel 0.023 in. - 0.052 in. Flux Cored 0.030 in. - 0.078125 in Flux Cored 0.8 mm. - 2.0 mm.
Portability
Handle(s)
Input Circuit Welding Rating
330 A at 60% duty cycle
Spool Size
8 in. (203 mm) 14 lb. (6.4 kg)
Welding Power Source Type
CC/CV DC
Wire Feeder Type
Voltage-Sensing
Net Width
7.25 in
Net Height
12.75 in
Net Length
18 in
Net Weight
28 lbs
Includes • ArcReach 8 feeder (8-Inch Spool Capacity) • 15' Bernard Flux-Cored Gun • Centerfire contact tips: (3) .045 | (2) .052 • .068/.072-5/64 V-Knurled drive roll kit (Guides already installed on feeder)
The only problem I see with it. Is that the valve that controls the flow of fluid to the chain sometimes loosen up on its on while cutting causing excess fluid to drain out. So I got to keep getting out of the machine to reset the valve.
Miller ArcReach Suitcase 8 w/Flux Cored Gun (951728)
The Miller ArcReach Suitcase 8 feeder allows the operator to adjust the output voltage at the feeder, saving a trip back to the power supply - no extra control cable to purchase. ArcReach equipped power sources and wire feeders work with non-ArcReach equipment, however the complete benefits are only realized with the ArcReach system.
Product Video
Features
ArcReach Suitcase Features • Electronic wire feed speed with control tachometer • Digital meters with sunvision technology • Front panel has trigger hold, wire jog, and gas purge • Ability to change wire with feeder in upright position • Dual schedule capable (dual schedule switch sold separately) • Gun locking tab prevents gun from being pulled out prematurely • Recessed gas inlet on rear of case
Quick Specs • Input Power: 14-48 VDC operating range • Wire Feed Speed: 50-780 ipm • Duty Cycle: 60% @ 330A • Wire Diameter Capacity: .023 - .052 Solid Wire | .030 - 5/64 Flux Cored • Max Wire Diameter: 8" or 14lb Spool • Dims: 15.5" H x 9" W x 21" D • Weight: 28lbs
Processes
Flux Cored (FCAW)
MIG (GMAW)
Processes
Flux Cored (FCAW)
MIG (GMAW)
General Specifications
Title
ArcReach® SuitCase® 8, Bernard™ Dura-Flux Gun Pkg
Wire Feed Speed
1.3 m/min - 19.8 m/min 50 IPM - 780 IPM
Wire Diameter
Solid Steel 0.6 mm. - 1.4 mm. Solid Steel 0.023 in. - 0.052 in. Flux Cored 0.030 in. - 0.078125 in Flux Cored 0.8 mm. - 2.0 mm.
Portability
Handle(s)
Input Circuit Welding Rating
330 A at 60% duty cycle
Spool Size
8 in. (203 mm) 14 lb. (6.4 kg)
Welding Power Source Type
CC/CV DC
Wire Feeder Type
Voltage-Sensing
Net Width
7.25 in
Net Height
12.75 in
Net Length
18 in
Net Weight
28 lbs
Includes • ArcReach 8 feeder (8-Inch Spool Capacity) • 15' Bernard Flux-Cored Gun • Centerfire contact tips: (3) .045 | (2) .052 • .068/.072-5/64 V-Knurled drive roll kit (Guides already installed on feeder)
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
