Miller Millermatic 252 MIG Welder With 30A Spool Gun (951960)
Not only can the Miller Millermatic 252 can weld material from 22 gauge to 1/2in thick in a single pass and has the highest output in its class, this package includes a Spoolmatic 30A Gun!
Product Video
Features
Highest Output in its Class: (250 A at 28 VDC). Weld longer on high-end applications.
Auto Gun Detect: Miller's Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun.
Angled, Dual-Gear Driven, Cast Aluminum Drive System: Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Access Consumable Compartment and Parameter Chart.: The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wire feed speed.
Large, Digital Front Panel with Built-in Digital Timers Menu: Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Push-Pull Gun Direct Connect: Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.
EZ-Change Low Cylinder Rack: Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Larger Work Area: Now with longer 15-ft M-25 MIG gun means you can reach more of your work without having to stop and move the machine.
Comes complete with: • Millermatic 252 power source • 10 ft (3 m) power cord and plug • 15 ft (4.5 m), 250 amp MDX 250 MIG Gun (This takes Miller MDX Consumables) • 30 ft Spoolmatic 30A Spool Gun (130831) • 10 ft (3 m) work cable and clamp • Argon mix regulator/flow gauge and hose • Extra contact tips • EZ-Change Dual Cylinder Rack • .030/.035 in reversible drive rolls
200 Amps at 24 VDC, 60% duty cycle,250 Amps at 26.5 VDC, 40% duty cycle
Max Open Circuit Voltage
38 VDC
Wire Feed Speed
1.3 m/min - 17.8 m/min 50 IPM - 700 IPM
Wire Diameter
Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Miller Millermatic 252 MIG Welder With 30A Spool Gun (951960)
Not only can the Miller Millermatic 252 can weld material from 22 gauge to 1/2in thick in a single pass and has the highest output in its class, this package includes a Spoolmatic 30A Gun!
Product Video
Features
Highest Output in its Class: (250 A at 28 VDC). Weld longer on high-end applications.
Auto Gun Detect: Miller's Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun.
Angled, Dual-Gear Driven, Cast Aluminum Drive System: Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
EZ-Access Consumable Compartment and Parameter Chart.: The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wire feed speed.
Large, Digital Front Panel with Built-in Digital Timers Menu: Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.
Push-Pull Gun Direct Connect: Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.
EZ-Change Low Cylinder Rack: Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Larger Work Area: Now with longer 15-ft M-25 MIG gun means you can reach more of your work without having to stop and move the machine.
Comes complete with: • Millermatic 252 power source • 10 ft (3 m) power cord and plug • 15 ft (4.5 m), 250 amp MDX 250 MIG Gun (This takes Miller MDX Consumables) • 30 ft Spoolmatic 30A Spool Gun (130831) • 10 ft (3 m) work cable and clamp • Argon mix regulator/flow gauge and hose • Extra contact tips • EZ-Change Dual Cylinder Rack • .030/.035 in reversible drive rolls
200 Amps at 24 VDC, 60% duty cycle,250 Amps at 26.5 VDC, 40% duty cycle
Max Open Circuit Voltage
38 VDC
Wire Feed Speed
1.3 m/min - 17.8 m/min 50 IPM - 700 IPM
Wire Diameter
Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm.
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
