Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V (907734)
Easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users. Color screen featuring Auto-Set Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power. Welds up to 1/2" aluminum, stainless and mild steel.
Product Video
What's Included
Power source with 10 ft. (3 m) power cord
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
10 ft. (3 m) work cable with clamp and 50mm Dinse-style connector
Features
Easy-to-understand interface: 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality: Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite: Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings: Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology: For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility: Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb.: Weight is reduced by more than 50 percent compared to the Millermatic 252.
EZ-Latch running gear: Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.will occur when used with smaller generators.
Flow gauge regulator and gas hose for argon or AR/CO2 mix
Extra contact tips
Material Thickness Gauge
.035/.045 in. (0.9/1.2 mm) reversible drive rolls
General Specifications
Title
Millermatic® 255 MIG/Pulsed MIG Welder - 208/240V
Applications
Aluminum Welding Fabrication Mobile Fabrication & MRO Welding Education and Training
Industries
Racing, Customizing & Restoring Farm & Ranch Auto Repair Manufacturing
Aluminum 0.035 in. - 0.047 in. Aluminum 0.9 mm. - 1.2 mm. Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm. Silicon Bronze 0.030 in. - 0.035 in. Silicon Bronze 0.8 mm - 0.9 mm.
hello there we are happy with the product but i suggest to use a different delivery company ESTES company who delivered the product didn´t had anything to move the product inside the trailer truck so we had to pushed the item to the end of the trailer to be able to unloaded it. at first I asked the driver why did had the pallet jack to move stuff around he said the company didn't provide anything and didn´t care about that so he told me i can refuse the delivery but we can not refuse it since it was a item we need for our shop to be able to work so we ended up pushed the heavy forklift boom so I suggest to use a different delivery company since ESTES DO NOT CARE about the delivery and can be damege items by pushing them
14 days ago I placed this order and it still has never shipped . I want answers and I want the tool I purchased asap. The company made a shipping label and that is all. Not pleased !! $1500 investment and now I’m behind on jobs because of it .
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V (907734)
Easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users. Color screen featuring Auto-Set Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power. Welds up to 1/2" aluminum, stainless and mild steel.
Product Video
What's Included
Power source with 10 ft. (3 m) power cord
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
10 ft. (3 m) work cable with clamp and 50mm Dinse-style connector
Features
Easy-to-understand interface: 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality: Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite: Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings: Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology: For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility: Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb.: Weight is reduced by more than 50 percent compared to the Millermatic 252.
EZ-Latch running gear: Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.will occur when used with smaller generators.
Flow gauge regulator and gas hose for argon or AR/CO2 mix
Extra contact tips
Material Thickness Gauge
.035/.045 in. (0.9/1.2 mm) reversible drive rolls
General Specifications
Title
Millermatic® 255 MIG/Pulsed MIG Welder - 208/240V
Applications
Aluminum Welding Fabrication Mobile Fabrication & MRO Welding Education and Training
Industries
Racing, Customizing & Restoring Farm & Ranch Auto Repair Manufacturing
Aluminum 0.035 in. - 0.047 in. Aluminum 0.9 mm. - 1.2 mm. Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm. Silicon Bronze 0.030 in. - 0.035 in. Silicon Bronze 0.8 mm - 0.9 mm.
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
