Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V with Running Gear (951766)
The Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V (907734) is designed for the light manufacturing and fabrication users who want a smaller, versatile workhorse that is easy to setup and easy to use. This 250-amp inverter welder can be integrated on running gear for easy movement around the work area or it can be quickly disconnected from the running gear enabling portability, making it easier to integrate into a work cell or work in confined spaces.
Product Video
Features
Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings. Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb. Weight is reduced by more than 50 percent compared to the Millermatic 252.
EZ-Latch running gear Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
WHAT'S INCLUDED • Millermatic 255 with 10 ft. (3 m) power cord • 15 ft. (4.5 m) Miller MDX 250 MIG Gun for .035/.045 in. (0.9/1.2 mm) wire (Accepts Bernard AccuLock S Consumables) • 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector • Flow gauge regulator and gas hose for argon or AR/CO2 mix • Extra Contact tips • .035/.045 in. (0.9/1.2 mm) reversible drive rolls • Chain to secure gas cylinder • Material Thickness Gauge • EZ-Latch Running Gear
Aluminum 0.035 in. - 0.047 in. Aluminum 0.9 mm. - 1.2 mm. Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm. Silicon Bronze 0.030 in. - 0.035 in. Silicon Bronze 0.8 mm - 0.9 mm.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V with Running Gear (951766)
The Miller Millermatic 255 MIG/Pulsed MIG Welder- 208/240V (907734) is designed for the light manufacturing and fabrication users who want a smaller, versatile workhorse that is easy to setup and easy to use. This 250-amp inverter welder can be integrated on running gear for easy movement around the work area or it can be quickly disconnected from the running gear enabling portability, making it easier to integrate into a work cell or work in confined spaces.
Product Video
Features
Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings. Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb. Weight is reduced by more than 50 percent compared to the Millermatic 252.
EZ-Latch running gear Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
WHAT'S INCLUDED • Millermatic 255 with 10 ft. (3 m) power cord • 15 ft. (4.5 m) Miller MDX 250 MIG Gun for .035/.045 in. (0.9/1.2 mm) wire (Accepts Bernard AccuLock S Consumables) • 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector • Flow gauge regulator and gas hose for argon or AR/CO2 mix • Extra Contact tips • .035/.045 in. (0.9/1.2 mm) reversible drive rolls • Chain to secure gas cylinder • Material Thickness Gauge • EZ-Latch Running Gear
Aluminum 0.035 in. - 0.047 in. Aluminum 0.9 mm. - 1.2 mm. Stainless 0.023 in. - 0.045 in. Stainless 0.6 mm. - 1.2 mm. Solid Steel 0.6 mm. - 1.2 mm. Solid Steel 0.023 in. - 0.045 in. Flux Cored 0.03 in. - 0.045 in. Flux Cored 0.8 mm. - 1.2 mm. Silicon Bronze 0.030 in. - 0.035 in. Silicon Bronze 0.8 mm - 0.9 mm.
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
