Extend and get more fork under your load
Get more fork under bulky and awkward loads with a Star Industries fork extension. It’s quick and easy to install with installation and removal taking just seconds.
Things you need to know about fork extensions
- Overall length of fork extension must not exceed 150% of fork length.
- Inside width of fork extension must not be more than ½" wider than fork.
- Forklift capacity is substantially reduced when center of load is moved out beyond standard 2 ft. load center.
- Do not pick up load with tip of fork extensions.
- Load must be centered on fork extensions or closer to the backstop.
Specifications
| Model | Overall length | Fits Forks | Weight per set |
|---|---|---|---|
| 1664 | 72″ | 4″ x 48″ | 120 lbs |
| 1665 | 72″ | 5″ x 48″ | 140 lbs |
| 1666 | 72″ | 6″ x 48″ | 160 lbs |
Danger: Do NOT use without installing retaining pins behind the heel of each fork and securing with hairpins or cotter pins. Safety chain(s) must also be used. Wrap chain around a strong part of the fork carriage and secure with locking grab hook.
Download Product Data Sheet
Fork Extender Connection
FAQ
Are your attachments approved by the forklift manufacturers?
We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift?
First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers.
ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class.
Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start?
Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured?
All our equipment attachments are proudly manufactured in the USA.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recently viewed
