Heavy Duty Bucket perfect for all types of applications
The Star Industry Heavy Duty Skid Steer Bucket is built to last. It’s constructed with extra heavy-duty steel, fully welded seams and reinforced hat section and side blades to strengthen and protect bucket sides. The bucket’s bottom is set close to the ground for level ‘back dragging’ (landscapers love it!).
Strong hat section:provides unyielding strength across the entire top of bucket.
Steel side blades:strengthens and protects bucket sides.
Seams Fully welded:continuous weld inside and outside of shell seams provides greater strength and longer life.
Low Profile design:operator can see the leading edge from the seat. Other profiles are also available.
Bevelled hard carbon steel punched blade:on leading edge ½” x 6” or ¾” x 6” depending on bucket width.
Buckets designed to fit each brand of loader:even though all new skid-steer loaders use a universal quick-tach they require different bucket profiles for proper operation. Star buckets are built to match your specific make & model of skid-steer loader.
Strong Universal Quick-Tach:constructed of 3/8” plate steel to stand up to the new more powerful skid-steer loaders.
Load Transfer Heavy (½” x 3”) scuff bars:three to five bars, depending on width, reinforce bucket bottom and protect from excessive wear.
Integrated Safety Steps
5-year warranty - made in USA
Specifications
Available options
Punched blade with bolt-on-blade: The reversible ⅝” x 8” bolt-on-blade gives 3 times the wear
Heavy-duty teeth: Features ‘pin-on’ series 23 teeth that measure 2¼ “across the point
Side Cutters: optional bolt-on
Optional Bucket Profiles
LOW PROFILE DIRT SKID-STEER BUCKETS
Model No.
Width ID inches
Width OD inches
Height OD inches
Depth OD inches
Capacity Heaped
Weight
LP22A-60
60”
62 ⅜”
20 ¼”
34”
15.0 cuft.
435 lbs.
LP22A-66
66“
68 ⅜”
20 ¼”
34“
16.5 cuft.
510 lbs.
LP22A-72
72“
74 ⅜”
20 ¼”
34”
18.0 cuft.
560 lbs.
LP22A-78
78“
80 ⅜”
20 ¼”
34“
19.6 cuft.
565 lbs.
LP22A-84
84“
86 ⅜”
20 ¼”
34”
21.0 cuft.
600 lbs.
LOW PROFILE DIRT SKID-STEER BUCKETS with BOLT on BLADE
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Heavy Duty Bucket perfect for all types of applications
The Star Industry Heavy Duty Skid Steer Bucket is built to last. It’s constructed with extra heavy-duty steel, fully welded seams and reinforced hat section and side blades to strengthen and protect bucket sides. The bucket’s bottom is set close to the ground for level ‘back dragging’ (landscapers love it!).
Strong hat section:provides unyielding strength across the entire top of bucket.
Steel side blades:strengthens and protects bucket sides.
Seams Fully welded:continuous weld inside and outside of shell seams provides greater strength and longer life.
Low Profile design:operator can see the leading edge from the seat. Other profiles are also available.
Bevelled hard carbon steel punched blade:on leading edge ½” x 6” or ¾” x 6” depending on bucket width.
Buckets designed to fit each brand of loader:even though all new skid-steer loaders use a universal quick-tach they require different bucket profiles for proper operation. Star buckets are built to match your specific make & model of skid-steer loader.
Strong Universal Quick-Tach:constructed of 3/8” plate steel to stand up to the new more powerful skid-steer loaders.
Load Transfer Heavy (½” x 3”) scuff bars:three to five bars, depending on width, reinforce bucket bottom and protect from excessive wear.
Integrated Safety Steps
5-year warranty - made in USA
Specifications
Available options
Punched blade with bolt-on-blade: The reversible ⅝” x 8” bolt-on-blade gives 3 times the wear
Heavy-duty teeth: Features ‘pin-on’ series 23 teeth that measure 2¼ “across the point
Side Cutters: optional bolt-on
Optional Bucket Profiles
LOW PROFILE DIRT SKID-STEER BUCKETS
Model No.
Width ID inches
Width OD inches
Height OD inches
Depth OD inches
Capacity Heaped
Weight
LP22A-60
60”
62 ⅜”
20 ¼”
34”
15.0 cuft.
435 lbs.
LP22A-66
66“
68 ⅜”
20 ¼”
34“
16.5 cuft.
510 lbs.
LP22A-72
72“
74 ⅜”
20 ¼”
34”
18.0 cuft.
560 lbs.
LP22A-78
78“
80 ⅜”
20 ¼”
34“
19.6 cuft.
565 lbs.
LP22A-84
84“
86 ⅜”
20 ¼”
34”
21.0 cuft.
600 lbs.
LOW PROFILE DIRT SKID-STEER BUCKETS with BOLT on BLADE
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
