Use your skid-loader to place concrete the easy way!
Star Industries Concrete Placement Bucket is the perfect solution to place concrete in hard to reach areas. No moving parts, no flimsy chutes to get torn up, no gates to freeze up with old concrete, no hydraulics to get contaminated with dust and dirt.
Simple, straight-forward design keeps costs low. Typically pays for itself on the first pour.
Rugged construction with reinforced bucket corners for stronger sides. Bucket bottom protected by ½” thick steel bars
No moving parts to break or get blocked with concrete
Extra high back helps keep concrete splatter off the loader
Specifications
Specifications
120
125
Bucket Capacity
½ cuyd
¾ cuyd
Overall Width
55”
77”
Discharge Opening
10”
12”
Empty Weight
470 lbs
625 lbs
Minimum Loader Capacity
1,650 lbs
3,000 lbs
Caution: Do not exceed the capacity of the loader. Concrete weights vary. Calculate load before use.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Use your skid-loader to place concrete the easy way!
Star Industries Concrete Placement Bucket is the perfect solution to place concrete in hard to reach areas. No moving parts, no flimsy chutes to get torn up, no gates to freeze up with old concrete, no hydraulics to get contaminated with dust and dirt.
Simple, straight-forward design keeps costs low. Typically pays for itself on the first pour.
Rugged construction with reinforced bucket corners for stronger sides. Bucket bottom protected by ½” thick steel bars
No moving parts to break or get blocked with concrete
Extra high back helps keep concrete splatter off the loader
Specifications
Specifications
120
125
Bucket Capacity
½ cuyd
¾ cuyd
Overall Width
55”
77”
Discharge Opening
10”
12”
Empty Weight
470 lbs
625 lbs
Minimum Loader Capacity
1,650 lbs
3,000 lbs
Caution: Do not exceed the capacity of the loader. Concrete weights vary. Calculate load before use.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
