Extend the reach of your forklift with a Star Industries heavy duty forklift jib. The telescopic boom extends up to a massive 12 feet making it the perfect solution to place heavy loads over or under obstacles.
Features
Pull spring-loaded pin to telescope—release pin and boom locks in desired position
Internal stop ensures telescopic section cannot be accidentally pulled all the way out
Jib slides on the forks and is pinned behind the heel to secure it to the forklift
Universal fit (slip-on-the forks) design permits use on most all forklifts
One bolted shackle and swivel hook is included
Specifications
Model
1360B
Max Load Capacity
6000 lbs @ 4′
Empty Weight
585 lbs
Extends
7’ 0” to 12’ 0”
Vertical Center of Gravity
Centerline
Horizontal Center of Gravity Fully retracted
36 5/16″
Horizontal Center of Gravity Extended midway
43 ¾”
Horizontal Center of Gravity Fully extended
54 7/16″
Hook Positions:
Hook Position
4
3
2
1
Distance
12′ 0″
9′ 0″
7′ 0″
4′ 0″
Maximum load on a single hook
2,000 lbs
3,000 lbs
4,000 lbs
6,000 lbs
Fork Pocket Size: 30″ long x 7½” x 3½” ID
Center to Center of Fork Pockets: 24″ / Pocket Ends are open.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Extend the reach of your forklift
Extend the reach of your forklift with a Star Industries heavy duty forklift jib. The telescopic boom extends up to a massive 12 feet making it the perfect solution to place heavy loads over or under obstacles.
Features
Pull spring-loaded pin to telescope—release pin and boom locks in desired position
Internal stop ensures telescopic section cannot be accidentally pulled all the way out
Jib slides on the forks and is pinned behind the heel to secure it to the forklift
Universal fit (slip-on-the forks) design permits use on most all forklifts
One bolted shackle and swivel hook is included
Specifications
Model
1360B
Max Load Capacity
6000 lbs @ 4′
Empty Weight
585 lbs
Extends
7’ 0” to 12’ 0”
Vertical Center of Gravity
Centerline
Horizontal Center of Gravity Fully retracted
36 5/16″
Horizontal Center of Gravity Extended midway
43 ¾”
Horizontal Center of Gravity Fully extended
54 7/16″
Hook Positions:
Hook Position
4
3
2
1
Distance
12′ 0″
9′ 0″
7′ 0″
4′ 0″
Maximum load on a single hook
2,000 lbs
3,000 lbs
4,000 lbs
6,000 lbs
Fork Pocket Size: 30″ long x 7½” x 3½” ID
Center to Center of Fork Pockets: 24″ / Pocket Ends are open.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
