Take the hard work and hassle out of loading and moving wire mesh panels
The Star Industries Wire Mesh Handler is primarily designed for use with a forklift; however, pick up points have been provided for use with a crane.
- Empty weight — 1025 lbs.
- Effective length — 13 ft
- Effective width — 7 ft. 5 in.
- Lifting chain — 5/16” grade 100 rated for lifting
- Accepts forks up to 2-3/8 inches thick x 7 inches wide
- Complies with ASME BTH-1-2008, design of below the hook lifting devices design category B service class 1
- Designed to a safety factor of 3:1
Full size flatbed required for shipping purposes
Specifications
| Model |
Description |
Size |
Capacity |
Weight |
| 1155 |
Fork Pockets 39″ OC.
Requires 48″ or wider Carriage.
Handles up to 8 ft. X 20 ft. wire mesh bundles. |
13’ |
7,000 lbs |
1025 lbs |
| 1155-36CCFP |
Fork Pockets 36″ OC.
Requires 44″ or wider Carriage.
Handles up to 8 ft. X 20 ft. wire mesh bundles. |
13’ |
6,500 lbs |
1025 lbs |
| 1155-24CCFP |
Fork Pockets 24″ OC.
Requires 32″ or wider Carriage.
Handles up to 8 ft. X 20 ft. wire mesh bundles. |
13’ |
6,500 lbs |
1025 lbs |
Manuals
Wire Mesh Handler 1155 - Manual
1155 - Dealer Drawing
FAQ
Are your attachments approved by the forklift manufacturers?
We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift?
First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers.
ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class.
Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start?
Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured?
All our equipment attachments are proudly manufactured in the USA.
