U.S. Industrial Machinery Hydraulic Press Brake, 155 TON x 8’, with Graphic CNC - USHB155-8CNC
Our CNC control hydraulic press brakes offer users the ability to tackle any project with precision, speed, and volume. These machines can handle the most demanding jobs with impeccable details. The capability to use a removable USB drive means that additional program storage is virtually limitless. Other key features include:
6” LCD touchscreen to control the bend angle and back-gauge position
10 bends per program or cross-section
Up to 20 punch library and up to 50 die library
Auto bend sequence
Auto back-gauge retract
Spread length
Interference bend chart
Calculated bend allowance
Programmable ram dwell
And more
Standard Equipment
(All of the following comes with the machine)
• Ram Deflection Adjustment
• Setting for ram speed slowdown and rapid return position
• Massive Torsion Bar for Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Auto Run
• Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included
• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1
• Space between Ram Tool Clamps allows for deep box bending
• Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel
Specification
• Working Pressure: 155 Tons
• Pressing Speed: Dependent on Tool Load
• Length of Working Table: 98.4”
• Hydraulic Oil Capacity: 60 Gal.
• Distance Between Housings: 80.7”
• Motor Horsepower: 10 HP, 220 or 440 Volts, 3 ph.
• Throat Depth: 12.5”
• Net Weight: 17,640 lbs.
• Stroke Adjustment of Ram: 2.36”
• Length: 120”
• Ram Travel: 5.9”
• Width: 64”
• Open Height: 16.3”
• Height: 101”
• Rapid Ram Travel Speed: 2.4”/sec.
• Rapid Ram Retreat Speed: 2.0”/sec.
• Backgauge Travel: 24”
Product Included
CNC 2-axis Color Graphic Computer Control
Sick deTec 4 Light Curtain
Available Options
• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) $9,995.00
• Upgrade to Pilz PSENvip LED Safety Guarding: (Substitute for deTec 4) $8,495.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) $4,995.00
• CNC Controlled Mechanical Auto Crown: $9,995.00
• Upgrade to Cam-Lever Quick Action Ram Clamps $3,295.00
• High Speed Servo Back Gauge: $6,995.00
• Training in our Memphis, TN Facility No Charge
• Training at customer site, less than 300 miles from Memphis: $2,995.00
• Training at customer site, more than 300 miles from Memphis: $3,995.00
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Product Description
Standard Equipment
Specification
Product Included
Available Options
Why Buy From Us
Product Description
U.S. Industrial Machinery Hydraulic Press Brake, 155 TON x 8’, with Graphic CNC - USHB155-8CNC
Our CNC control hydraulic press brakes offer users the ability to tackle any project with precision, speed, and volume. These machines can handle the most demanding jobs with impeccable details. The capability to use a removable USB drive means that additional program storage is virtually limitless. Other key features include:
6” LCD touchscreen to control the bend angle and back-gauge position
10 bends per program or cross-section
Up to 20 punch library and up to 50 die library
Auto bend sequence
Auto back-gauge retract
Spread length
Interference bend chart
Calculated bend allowance
Programmable ram dwell
And more
Standard Equipment
(All of the following comes with the machine)
• Ram Deflection Adjustment
• Setting for ram speed slowdown and rapid return position
• Massive Torsion Bar for Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Auto Run
• Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included
• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1
• Space between Ram Tool Clamps allows for deep box bending
• Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel
Specification
• Working Pressure: 155 Tons
• Pressing Speed: Dependent on Tool Load
• Length of Working Table: 98.4”
• Hydraulic Oil Capacity: 60 Gal.
• Distance Between Housings: 80.7”
• Motor Horsepower: 10 HP, 220 or 440 Volts, 3 ph.
• Throat Depth: 12.5”
• Net Weight: 17,640 lbs.
• Stroke Adjustment of Ram: 2.36”
• Length: 120”
• Ram Travel: 5.9”
• Width: 64”
• Open Height: 16.3”
• Height: 101”
• Rapid Ram Travel Speed: 2.4”/sec.
• Rapid Ram Retreat Speed: 2.0”/sec.
• Backgauge Travel: 24”
Product Included
CNC 2-axis Color Graphic Computer Control
Sick deTec 4 Light Curtain
Available Options
• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) $9,995.00
• Upgrade to Pilz PSENvip LED Safety Guarding: (Substitute for deTec 4) $8,495.00
• Add Third Axis (Back Gauge Height controlled from operator panel.) $4,995.00
• CNC Controlled Mechanical Auto Crown: $9,995.00
• Upgrade to Cam-Lever Quick Action Ram Clamps $3,295.00
• High Speed Servo Back Gauge: $6,995.00
• Training in our Memphis, TN Facility No Charge
• Training at customer site, less than 300 miles from Memphis: $2,995.00
• Training at customer site, more than 300 miles from Memphis: $3,995.00
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
