Product Description

U.S. Industrial Machinery Hydraulic Press Brake, 250 TON x 13’, with CNC - USHB250-13CNC

Our CNC control hydraulic press brakes offer users the ability to tackle any project with precision, speed, and volume. These machines can handle the most demanding jobs with impeccable details. The capability to use a removable USB drive means that additional program storage is virtually limitless. Other key features include:

• 6” LCD touchscreen to control the bend angle and back-gauge position
• 10 bends per program or cross-section
• Up to 20 punch library and up to 50 die library
• Auto bend sequence
• Auto back-gauge retract
• Spread length
• Interference bend chart
• Calculated bend allowance
• Programmable ram dwell
• And more

Standard Equipment

(All of the following comes with the machine)

• Ram Deflection Adjustment

• Setting for ram speed slowdown and return position

• Massive Torsion Bar for Parallelism

• Forged Heavy Duty Cylinder and Cylinder Body

• Three Speed Ram

• Rapid Approach, Bending Cycle and Rapid Retreat

• Bottom Time Delay

• All Steel Construction

• Inching, Single Cycle and Auto Run

• Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included

• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1

• Space between Ram Tool Clamps allows for deep box bending

• Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel

Specification

• Working Pressure: 250 Tons

• Rapid Ram Travel Speed: 2.4”/sec.

• Length of Working Table: 157.4”

• Rapid Ram Retreat Speed: 2.0”/sec.

• Distance Between Housings: 124”

• Pressing Speed: Dependent on Tool Load

• Throat Depth: 15.7”

• Hydraulic Oil Capacity: 108 Gal.

• Back Gauge Travel: 23.5”

• Motor Horsepower: 25 HP, 220 or 440 Volt, 3 ph.

• Stroke Adjustment of Ram: 3.14”

• Net Weight: 39,683 lbs.

• Ram Travel: 7.8”

• Length: 179”

• Open Height: 22”

• Width: 75”

• Strokes per Minute: 5

• Height: 108”

• Backgauge Travel: 24”

Product Included

• CNC 2-axis Color Graphic Computer Control
• Sick deTec 4 Light Curtain
• Third Axis (Back Gauge Height controlled from operator panel
• CNC Controlled Mechanical Auto Crown

Available Options

• Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) $9,995.00

• Upgrade to Pilz PSENvip LED Safety Guarding: (Substitute for deTec 4) $8,495.00

• Add Third Axis (Back Gauge Height controlled from operator panel.) Shown above

• CNC Controlled Mechanical Auto Crown Shown above

• Upgrade to Cam-Lever Quick Action Ram Clamps $6,495.00

• High Speed Servo Back Gauge $6,995.00

• Training in our Memphis, TN Facility No Charge

• Training at customer site, less than 300 miles from Memphis: $2,995.00

• Training at customer site, more than 300 miles from Memphis: $3,995.00 (If outside continental USA, please call for quote.)