Cantek PCM-508 (7.5HP) 230/460/575/3/60 20" Rotating Miter Pneumatic Chop Saw
Large capacity miter cut-off saw is built for production.
The Cantek PCM508 20” Miter Cut-Off Saw is a precision pneumatic saw designed for cutting miters up to 60oin either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade according to the desired cutting angle. The workpiece is clamped pneumatically, and the clamping guard runs on linear guideways for smooth and fast clamping operation. The PCM508 is available with optional infeed and outfeed conveyor systems with manual stops or can be fitted with an automatic stop system such as Tigerstop for added productivity.
Features
Cantek PCM-508 is a high productivity, high accuracy, high speed cut off saw. Its specially designed rotary table makes angular cutting easy and quick.
ROTARY TABLE
The table can be swiveled to right and left with 45° (max. 60°) angle. This allows for angular cutting.
The table is equipped with a lock pin, allowing the table to fast position at 45° (60°) .
Table surface is precision ground.
PRECISION, QUICK CLAMPING MECHANISM
The clamping mechanism is driven by an air cylinder in combination with the use of linear guide ways, that exhibit fast and smooth clamping motions
INFEED & OUTFEED FENCE
Infeed and outfeed fence surfaces are precision ground.
Equipped with an anti-bump rubber to prevent serious bumping of clamp.
PDF Brochure
Specifications
Cutting Capacity (Thickness x Width)
+45° (60°) ~ 0° ~ -45° (60°)
Cycle Speed
30 ~ 45 cuts/min
Saw Blade Size (optional)
20°
Saw Arbor diameter
1”
Saw Blade Speed
3100 rpm
Dust Exhaust Diameter
Ø4” x (2)
Motor
7.5 HP
Table Size
36.2” x 24.8” (920 x 630 mm)
Net Weight
1190 lbs (540 kg)
Gross Weight
1455 lbs (660 kg)
Packing Dimensions (L x W x H)
50.4” x 43.3” x 63” (1280 x 1100 x 1600 mm)
FAQs
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Cantek PCM-508 (7.5HP) 230/460/575/3/60 20" Rotating Miter Pneumatic Chop Saw
Large capacity miter cut-off saw is built for production.
The Cantek PCM508 20” Miter Cut-Off Saw is a precision pneumatic saw designed for cutting miters up to 60oin either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade according to the desired cutting angle. The workpiece is clamped pneumatically, and the clamping guard runs on linear guideways for smooth and fast clamping operation. The PCM508 is available with optional infeed and outfeed conveyor systems with manual stops or can be fitted with an automatic stop system such as Tigerstop for added productivity.
Features
Cantek PCM-508 is a high productivity, high accuracy, high speed cut off saw. Its specially designed rotary table makes angular cutting easy and quick.
ROTARY TABLE
The table can be swiveled to right and left with 45° (max. 60°) angle. This allows for angular cutting.
The table is equipped with a lock pin, allowing the table to fast position at 45° (60°) .
Table surface is precision ground.
PRECISION, QUICK CLAMPING MECHANISM
The clamping mechanism is driven by an air cylinder in combination with the use of linear guide ways, that exhibit fast and smooth clamping motions
INFEED & OUTFEED FENCE
Infeed and outfeed fence surfaces are precision ground.
Equipped with an anti-bump rubber to prevent serious bumping of clamp.
PDF Brochure
Specifications
Cutting Capacity (Thickness x Width)
+45° (60°) ~ 0° ~ -45° (60°)
Cycle Speed
30 ~ 45 cuts/min
Saw Blade Size (optional)
20°
Saw Arbor diameter
1”
Saw Blade Speed
3100 rpm
Dust Exhaust Diameter
Ø4” x (2)
Motor
7.5 HP
Table Size
36.2” x 24.8” (920 x 630 mm)
Net Weight
1190 lbs (540 kg)
Gross Weight
1455 lbs (660 kg)
Packing Dimensions (L x W x H)
50.4” x 43.3” x 63” (1280 x 1100 x 1600 mm)
FAQs
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
