Economical solution for cutting tenons for door and window frames.
The Cantek ST152C Single End Tenoner offers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The two opposed coping heads allow for long tenons to pass between to produce a profile to match your rail profile. The coping heads are also adjusted using precision mechanical counters.
Why Cantek ST152C Single End Tenoner?
Industrial cast iron machine frame for vibration free operation
(5) working units to produce a wide range of tenons and profiles for door, window components, and furniture parts
Accurate adjustment using mechanical digital readouts
Spiral insert knife tenon cutterheads with scriber tips for superior tenoning results
Opposed coping heads allow for profiling even with long tenons
Vertical and horizontal pneumatic workpiece clamping ensures material is secure during tenoning operation
Infeed and outfeed safety guards
Sliding table rolls on precision machined ” V ” ways allowing for precise and smooth table movement
Carbide insert spiral tenon heads with scribing inserts
152mm (6”) long x 127mm (5”) diameter tenons heads
5HP motor drives both tenon heads
1 ¼” diameter spindle
3400 RPM
1″ lateral adjustment of tenon heads
14 mm x 14mm x 2mm carbide insert knives (42 knives per head, total 84 knives)
Coping Heads
Max. dia. tooling: 6 3/8”
(2) 5 HP motors
1 ¼” diameter spindle
6000 RPM
2 ¾” spindle length
Independent adjustment each head
(2) 4 knife wedge type cutterheads with chip breakers included (60ocorrugated knives)
Counterbore locknut allows both heads to move close together
Specifications
Maximum tenon cut
Length
6”
152 mm
Width
14.5”
370 mm
Thickness
5”
127 mm
Maximum tenoning cutterhead size
4.3” dia. x 6” long
110mm dia. x 152mm long
Maximum shaping cutterhead size
Ø 6 3/8″
162mm
Maximum sawblade diameter
Ø 12 “
305mm
Spindle diameter
Tenon spindle
1 ¼”
Cope spindle
1 ¼”
Saw spindle
1 ¼”
Spindle speed
Tenon spindle
3400 RPM
Cope spindle
6000 RPM
Saw spindle
2800 RPM
Motor horsepower
Saw & tenon heads
7.5 HP
Cope heads
5 HP x 2
Sliding table area
50.4” x 17.7”
1280 x 450 mm
Electrics
230/3/60 = 42 full load amps
Net weight
1716 lbs
780 kgs
Gross weight
1914 lbs
870 kgs
Machine dimensions (LxWxH)
66” x 73” x 46”
1680 x 1840 x 1150 mm
Packing dimensions (LxWxH)
67” x 31” x 56”
1700 x 780 x 1400 mm
FAQs
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Cantek ST-152C Single End Tenoner
Economical solution for cutting tenons for door and window frames.
The Cantek ST152C Single End Tenoner offers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The two opposed coping heads allow for long tenons to pass between to produce a profile to match your rail profile. The coping heads are also adjusted using precision mechanical counters.
Why Cantek ST152C Single End Tenoner?
Industrial cast iron machine frame for vibration free operation
(5) working units to produce a wide range of tenons and profiles for door, window components, and furniture parts
Accurate adjustment using mechanical digital readouts
Spiral insert knife tenon cutterheads with scriber tips for superior tenoning results
Opposed coping heads allow for profiling even with long tenons
Vertical and horizontal pneumatic workpiece clamping ensures material is secure during tenoning operation
Infeed and outfeed safety guards
Sliding table rolls on precision machined ” V ” ways allowing for precise and smooth table movement
Carbide insert spiral tenon heads with scribing inserts
152mm (6”) long x 127mm (5”) diameter tenons heads
5HP motor drives both tenon heads
1 ¼” diameter spindle
3400 RPM
1″ lateral adjustment of tenon heads
14 mm x 14mm x 2mm carbide insert knives (42 knives per head, total 84 knives)
Coping Heads
Max. dia. tooling: 6 3/8”
(2) 5 HP motors
1 ¼” diameter spindle
6000 RPM
2 ¾” spindle length
Independent adjustment each head
(2) 4 knife wedge type cutterheads with chip breakers included (60ocorrugated knives)
Counterbore locknut allows both heads to move close together
Specifications
Maximum tenon cut
Length
6”
152 mm
Width
14.5”
370 mm
Thickness
5”
127 mm
Maximum tenoning cutterhead size
4.3” dia. x 6” long
110mm dia. x 152mm long
Maximum shaping cutterhead size
Ø 6 3/8″
162mm
Maximum sawblade diameter
Ø 12 “
305mm
Spindle diameter
Tenon spindle
1 ¼”
Cope spindle
1 ¼”
Saw spindle
1 ¼”
Spindle speed
Tenon spindle
3400 RPM
Cope spindle
6000 RPM
Saw spindle
2800 RPM
Motor horsepower
Saw & tenon heads
7.5 HP
Cope heads
5 HP x 2
Sliding table area
50.4” x 17.7”
1280 x 450 mm
Electrics
230/3/60 = 42 full load amps
Net weight
1716 lbs
780 kgs
Gross weight
1914 lbs
870 kgs
Machine dimensions (LxWxH)
66” x 73” x 46”
1680 x 1840 x 1150 mm
Packing dimensions (LxWxH)
67” x 31” x 56”
1700 x 780 x 1400 mm
FAQs
How long has Cantek been around? Cantek America was established in 1985, and has progressively grown throughout North America each year since then
Where are Cantek Machines made? Cantek Machines are made in reputable factories in Taiwan. They are made to meet the highest quality standards in North America.
What kind of Service does Cantek provide? We sell our machines through reputable dealers who have in-house service technicians. We also have a vast supply of parts and knowledgeable staff to answer questions.
Are the machines in stock? We stock a complete range of machines for solid wood as you can see on this site.
Where can you get parts for these machines? The switches are telemacanique/squareD, which are available locally across North America, also available are the standard v-belts and Camozzi air components. If you have any trouble, please call our office for assistance.
About Cantek Machinery
Since 1985, Cantek has been a leading supplier of solid wood & panel processing machinery for the North American market.
Cantek woodworking equipment is built to exacting North American standards by the most reputable factories in Taiwan. This gives the customer the best of both worlds. American design quality and excellent overall dollar value, it’s what Cantek is all about.
We sell our machines through reputable dealers who have in-house service technicians. Cantek also has a vast supply of parts and knowledgeable staff to answer your questions. We stock a wide range of equipment for both solid wood & panel processing for both custom and production shops. At Cantek, we offer in-house financing which allows you the ability to purchase your production equipment allowing it to pay for itself.
Knowledgeable Sales Staff Our team of account representatives will visit you personally and ensure that you invest in the right solution to your manufacturing challenges. With their broad knowledge base in a wide range of applications and machinery, they can guide you through the various processes from equipment selection, installation, and after-sales support.
After Sales Service Our service staff ensures that your investment keeps running to maximize the efficiency of your manufacturing process. Some of the services we offer are equipment installation & training, applications training, after-sales technical support, and scheduled periodic machinery maintenance on request.
Technical Support With a large network of service staff located across the country, we have a vast knowledge base to draw from. Many of the issues which can arise whether it be electrical, mechanical, or applications based can be solved over the phone. Our service professionals will walk through your issue and work to resolve it. If it cannot be resolved over the phone we can send a technician to your facility to make it right.
Spare Parts Our group of inside sales professionals are there to assist you with your requirements for spare parts. We carry a large inventory of spare parts and this inventory is consistently evaluated to ensure that we have the right parts for your machine. In addition to providing you with spare parts support, out team can provide you with consumable products including blades, belts, wheels, etc for your machine.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
