Looking for a practical and cost–effective machine to fulfill your sawing requirements? DoALL DS-280M is the right choice for fabricators with an economically designed footprint. The DoALL DS-280M StructurALL® 2-speed, dual-miter band saw is designed for cutting vertical and angular material for low volume piece production.
The DS-280M dual-swivel ability allows miter-cutting from 60° right and 45° left. The DS-280M features 2-speeds, a blade-driven band brush and a 3.3 foot manual set work stop. A large variety of optional accessories are available to customize the machine for specific sawing requirements.
Easy to operate, ergonomically placed push-button control panel, along with quick release clamp/unclamp vice handle gives the machine the opportunity to create quick single and small production run pieces. The saw head feed is controlled by use of the balanced head weight assisted by a micrometer adjusted hydraulic valve. The two band speeds allow for the cutting of different material types by use of a 1-1.5 hp electric motor. Miter cuts from 45 degrees left to 60 degrees right are able to be made by manually unlocking and adjusting the head to the desired position via an onboard protractor.
Product Video:
Specifications
Cutting Capacity Round Tube:
9" (230mm)
Cutting Capacity Rectangle:
11" x 8.2" (280mm x 210mm)
Cutting Capacity Round Solid:
5.9" (150mm)
Miter Cutting:
60° right and 45° left
Capacity at 45°: Round:
7.5" (190mm), Rectangle: 7" x 6.7" (180mm x 170mm)
Capacity at 60°: Round:
4" (100mm), Rectangle: 4" x 4.75" (100mm x 70mm)
Band Saw Blade Width:
1" x 0.035" (27x0.9mm)
Maximum Blade Length:
107" (2720mm)
Band Speed:
115 fpm / 230 fpm (35mpm / 70mpm)
Band Drive:
1hp / 1.5hp (0.75kw / 1.1kw)
Motor:
220V - 3 Phase
Coolant Pump:
0.07 hp (0.05kW)
Material Pass Line Height:
31-1/3" (795mm)
Machine Weight:
618lbs (280kg)
Dimensions W x L x H:
65" x 35" x 74" (1650mm x 885mm x 1860mm)
Purchase Includes:
Dual swivel head to 45 left to 60 degrees right
Fine adjustment head feed control
Push button control panel
Carbide faced saw guide inserts
3 ft manual set work stop
Blade driven cleaning brush
Two speed band motor
Counter balance springs
Manual band tension
Recirculating coolant system
Movable two position vise system
Saw blade guards
Band door interlocks
Operation and parts manuals on USB stick
One (1) complimentary DoALL Bi Metal saw blade
Complimentary DoALL Cutting Fluids package
Optional Accessories:
3.3 ft. (1000mm) Input conveyor for angle cutting with drip pan/gutter - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
3.3 ft. (1000mm) Output conveyor for angle cutting with drip pan/gutters - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
6.6 ft. (2000mm) Input or output conveyor - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
10 ft Medium-duty idleer conveyor 8" between frames. Roller capacity 850 lbs.
Wear parts service kit - contains wear plates, guides, band brushes
Additional USB stick of manuals
Four (4) hours installation and operator training
DoALL Cut Above 10 Year Warranty Annual Investment
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
DoAll Dual-Miter Manual Band Saw DS-280M
Looking for a practical and cost–effective machine to fulfill your sawing requirements? DoALL DS-280M is the right choice for fabricators with an economically designed footprint. The DoALL DS-280M StructurALL® 2-speed, dual-miter band saw is designed for cutting vertical and angular material for low volume piece production.
The DS-280M dual-swivel ability allows miter-cutting from 60° right and 45° left. The DS-280M features 2-speeds, a blade-driven band brush and a 3.3 foot manual set work stop. A large variety of optional accessories are available to customize the machine for specific sawing requirements.
Easy to operate, ergonomically placed push-button control panel, along with quick release clamp/unclamp vice handle gives the machine the opportunity to create quick single and small production run pieces. The saw head feed is controlled by use of the balanced head weight assisted by a micrometer adjusted hydraulic valve. The two band speeds allow for the cutting of different material types by use of a 1-1.5 hp electric motor. Miter cuts from 45 degrees left to 60 degrees right are able to be made by manually unlocking and adjusting the head to the desired position via an onboard protractor.
Product Video:
Specifications
Cutting Capacity Round Tube:
9" (230mm)
Cutting Capacity Rectangle:
11" x 8.2" (280mm x 210mm)
Cutting Capacity Round Solid:
5.9" (150mm)
Miter Cutting:
60° right and 45° left
Capacity at 45°: Round:
7.5" (190mm), Rectangle: 7" x 6.7" (180mm x 170mm)
Capacity at 60°: Round:
4" (100mm), Rectangle: 4" x 4.75" (100mm x 70mm)
Band Saw Blade Width:
1" x 0.035" (27x0.9mm)
Maximum Blade Length:
107" (2720mm)
Band Speed:
115 fpm / 230 fpm (35mpm / 70mpm)
Band Drive:
1hp / 1.5hp (0.75kw / 1.1kw)
Motor:
220V - 3 Phase
Coolant Pump:
0.07 hp (0.05kW)
Material Pass Line Height:
31-1/3" (795mm)
Machine Weight:
618lbs (280kg)
Dimensions W x L x H:
65" x 35" x 74" (1650mm x 885mm x 1860mm)
Purchase Includes:
Dual swivel head to 45 left to 60 degrees right
Fine adjustment head feed control
Push button control panel
Carbide faced saw guide inserts
3 ft manual set work stop
Blade driven cleaning brush
Two speed band motor
Counter balance springs
Manual band tension
Recirculating coolant system
Movable two position vise system
Saw blade guards
Band door interlocks
Operation and parts manuals on USB stick
One (1) complimentary DoALL Bi Metal saw blade
Complimentary DoALL Cutting Fluids package
Optional Accessories:
3.3 ft. (1000mm) Input conveyor for angle cutting with drip pan/gutter - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
3.3 ft. (1000mm) Output conveyor for angle cutting with drip pan/gutters - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
6.6 ft. (2000mm) Input or output conveyor - 11.4" (290mm) roller width - 134 lbs./ft. (200kg/m) capacity - has adjustable leg
10 ft Medium-duty idleer conveyor 8" between frames. Roller capacity 850 lbs.
Wear parts service kit - contains wear plates, guides, band brushes
Additional USB stick of manuals
Four (4) hours installation and operator training
DoALL Cut Above 10 Year Warranty Annual Investment
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage