The DC-800NC Continental Series™ high production horizontal band saw by DoALL is designed for cutting a wide range of materials in a fully-automated capacity.
If you are a primary metal supplier, foundry or cutting large parts for heavy-duty applications, the DC-800NC will provide you with both robust build quality and improved production.
The DC-800NC comes with digital touch screen controls, which operate the fully hydraulic accessories.
Details:
Touch Screen Control Easy operator input. 20 Job storage with batching capabilities. Control is multi-lingual for today's workforce. Will display error message when incorrect entry is made. Easy switching between imperial or metric units.
High-Efficiency Transmission High-efficiency worm gear box built to decrease wear and transmit full torque to the saw blade. Double wide “V” belt to avoid slipping, transmitting full motor power to the transmission.
Hydraulic Chip Conveyor Adjustable speed auger style conveyor allows for coolant drain from chips before extraction.
Coolant Thru Carbide Faced Saw Guide Inserts Supplies coolant to the blade evenly before and after the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
Efficiently Designed Hydraulic System Engineered low-pressure system allows for a smoother and quieter operation which aids in longer component life and easy accessibility for maintenance.
Band Wheels 30 Degree lay-back head design minimizes band twist which causes band fatigue and also allows a smaller foot print. Flange cast steel wheels insure band tracking to prevent tooth set lost.
Underslung Indexer System Reduces friction when indexing heavier or rough surface material by the use of rollers allowing for smoother material movements.
Movable Saw Guide Arm An electrical driven movable guide arm with a hydraulic lock system aids the operator in the placement of the arm close to the cut minimizes blade deflection.
Hydraulic Blade Tension Eliminates possible error of over/under-tightening the band for maximum cutting rates and band life.
Back-up Bearing/Inserts Supports the back of the saw band allowing the creation of band preload which aids in reducing vibration while cutting and increasing blade life.
Retractable Shuttle Type Index Vise Both jaws retract when vise is opened to accommodate the movement of crooked stock increasing accuracy and repeatability.
Magnetic Scale for Indexer The scale which creates indexing accuracy is protected from dirt and oil build up insuring its long life.
Nesting Fixtures Plug-n-play vertical hold-down clamp assemblies allow the operator to perform multiple-piece cutting to increase productivity.
Warranty One-year parts and service subject to the terms and conditions. 10-year manufacturer’s warranty available (Cut Above Lifetime Warranty).
Product Overview Video:
Specifications:
Saw Blade:
Width x Length – 2.625" x 347"
Band Drive:
Motor HP - 15 HP
Band Speed - 52-275 fpm
Band Tension - Hydraulic
Hydraulic System:
Motor HP - 3 HP
Reservoir Size - 34 Gallon
Coolant System:
Flood coolant
Motor HP - 1/4 HP
Reservoir Size 63 Gallon
Indexer:
Length per Stroke - 15.75"
Maximum Index Strokes Length - 236"
Remnant Length - 9" (non bundle)
Floor Space Dimensions:
W x L X H - 172" x 94" x 108"
Material Pass Height - 36"
Machine Weight - 25,350 lbs.
Electrical:
Voltage Requirement - 230V-60Hz-3ph, Wye configuration
Total Amp Draw (FLA) - 61 Amps
Purchase Includes:
Programmable Logic Controller for all machine functions
Feed rate/feed force saw head control
Infinite band speed controlled variable frequency drive
Hydraulic retractable shuttle vice material indexer on chrome rails
Rapid and creep speed index vice control
Full stroke vices with moveable outboard front vise
Variable vice pressure control
Vertical hydraulic cylinders with hold down fixtures
Hydraulic set, zero clearance, coolant through,
carbide faced saw guide inserts with lead in rollers
Adjustable power driven band cleaning brushes with coolant flush line attached
Halogen work light
Electric motor driven movable saw guide arm
Blade shock proof device
Flushing hose for machine wash down and auxiliary coolant nozzles
Saw band break/stall motion detector shut off switch
Band door interlocks
Operation and parts manuals on USB stick
One 6.5 ft. (2M) idler input conveyor
Maintenance tool kit
Complimentary DoALL Cutting Fluids package
One (1) complimentary DoALL Bi Metal saw blade
Optional Accessories:
10 ft. idler conveyor
5 ft. idler conveyor with filler plates
Out of square detection
Additional USB stick of manuals
Laser line
A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards.
DoALL Cut Above 10 Year Warranty Annual Investment
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Awesome bucket, could use some better hose management
Love the build of the bucket itself, and the extra reach from the front-dump feature is really nice. However, the way they routed the hydraulic hoses by default left them dragging on the ground when scraping with the bucket. We had to add some loops to keep them from dragging. Otherwise, great product!
The DC-800NC Continental Series™ high production horizontal band saw by DoALL is designed for cutting a wide range of materials in a fully-automated capacity.
If you are a primary metal supplier, foundry or cutting large parts for heavy-duty applications, the DC-800NC will provide you with both robust build quality and improved production.
The DC-800NC comes with digital touch screen controls, which operate the fully hydraulic accessories.
Details:
Touch Screen Control Easy operator input. 20 Job storage with batching capabilities. Control is multi-lingual for today's workforce. Will display error message when incorrect entry is made. Easy switching between imperial or metric units.
High-Efficiency Transmission High-efficiency worm gear box built to decrease wear and transmit full torque to the saw blade. Double wide “V” belt to avoid slipping, transmitting full motor power to the transmission.
Hydraulic Chip Conveyor Adjustable speed auger style conveyor allows for coolant drain from chips before extraction.
Coolant Thru Carbide Faced Saw Guide Inserts Supplies coolant to the blade evenly before and after the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
Efficiently Designed Hydraulic System Engineered low-pressure system allows for a smoother and quieter operation which aids in longer component life and easy accessibility for maintenance.
Band Wheels 30 Degree lay-back head design minimizes band twist which causes band fatigue and also allows a smaller foot print. Flange cast steel wheels insure band tracking to prevent tooth set lost.
Underslung Indexer System Reduces friction when indexing heavier or rough surface material by the use of rollers allowing for smoother material movements.
Movable Saw Guide Arm An electrical driven movable guide arm with a hydraulic lock system aids the operator in the placement of the arm close to the cut minimizes blade deflection.
Hydraulic Blade Tension Eliminates possible error of over/under-tightening the band for maximum cutting rates and band life.
Back-up Bearing/Inserts Supports the back of the saw band allowing the creation of band preload which aids in reducing vibration while cutting and increasing blade life.
Retractable Shuttle Type Index Vise Both jaws retract when vise is opened to accommodate the movement of crooked stock increasing accuracy and repeatability.
Magnetic Scale for Indexer The scale which creates indexing accuracy is protected from dirt and oil build up insuring its long life.
Nesting Fixtures Plug-n-play vertical hold-down clamp assemblies allow the operator to perform multiple-piece cutting to increase productivity.
Warranty One-year parts and service subject to the terms and conditions. 10-year manufacturer’s warranty available (Cut Above Lifetime Warranty).
Product Overview Video:
Specifications:
Saw Blade:
Width x Length – 2.625" x 347"
Band Drive:
Motor HP - 15 HP
Band Speed - 52-275 fpm
Band Tension - Hydraulic
Hydraulic System:
Motor HP - 3 HP
Reservoir Size - 34 Gallon
Coolant System:
Flood coolant
Motor HP - 1/4 HP
Reservoir Size 63 Gallon
Indexer:
Length per Stroke - 15.75"
Maximum Index Strokes Length - 236"
Remnant Length - 9" (non bundle)
Floor Space Dimensions:
W x L X H - 172" x 94" x 108"
Material Pass Height - 36"
Machine Weight - 25,350 lbs.
Electrical:
Voltage Requirement - 230V-60Hz-3ph, Wye configuration
Total Amp Draw (FLA) - 61 Amps
Purchase Includes:
Programmable Logic Controller for all machine functions
Feed rate/feed force saw head control
Infinite band speed controlled variable frequency drive
Hydraulic retractable shuttle vice material indexer on chrome rails
Rapid and creep speed index vice control
Full stroke vices with moveable outboard front vise
Variable vice pressure control
Vertical hydraulic cylinders with hold down fixtures
Hydraulic set, zero clearance, coolant through,
carbide faced saw guide inserts with lead in rollers
Adjustable power driven band cleaning brushes with coolant flush line attached
Halogen work light
Electric motor driven movable saw guide arm
Blade shock proof device
Flushing hose for machine wash down and auxiliary coolant nozzles
Saw band break/stall motion detector shut off switch
Band door interlocks
Operation and parts manuals on USB stick
One 6.5 ft. (2M) idler input conveyor
Maintenance tool kit
Complimentary DoALL Cutting Fluids package
One (1) complimentary DoALL Bi Metal saw blade
Optional Accessories:
10 ft. idler conveyor
5 ft. idler conveyor with filler plates
Out of square detection
Additional USB stick of manuals
Laser line
A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards.
DoALL Cut Above 10 Year Warranty Annual Investment
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
