Stainless steel welder/generator that provides great welding performance for AC or DC stick and DC wire welding.
Features
EXTRA POWER, EXTRA PERFORMANCE
Get all of the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.
-
Totally Enclosed Case
- Engine is fully protected.
- 3 service access doors.
- Low Noise - 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
- Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
-
Versatile AC/DC Welding
- AC/DC welding output for a broad range of stick electrode types.
- Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™for aluminum and other alloy welding.
- MIG and Flux-Cored capable (with optional equipment).
- Remote ready! 6-pin connector and local/remote switch for remote control operation.
-
11,000 Watts Peak Single-Phase AC Generator Power
- Peak for motor starting.
- 10,000 watts continuous power for generator, plasma cutter or inverter welder.
- Lights, grinder, power tools.
-
23 HP Kohler® Gasoline Engine
- 2 cylinder, 4 cycle overhead valve air-cooled design.
- Electric fuel pump avoids vapor lock.
- Oil drain extension for easy oil changes.
- 12 gallon tank for extended run times.
- Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
-
Rugged Reliability
- Welding and AC Generator Outputs Rated at 104°F (40°C).|
Additional Features
- Totally Enclosed Case
- Versatile AC/DC Welding
- 11,000 Watts Peak Single-Phase AC Generator Power
- 23 HP Kohler Gasoline Engine
- Rugged Reliability
- Welding and AC Generator Outputs Rated at 104°F (40°C).|
What's Included
- (1) Ranger 250 GXT Engine Driven Welder
Specifications
Product Weights & Dimensions
| Dimensions (H x W x D) | 30 in x 21.5 in x 42.3 in (762 mm x 546 mm x 1073 mm) |
| Net Weight | 602 lbs (273 kg) |
Machines
| Machines Processes | Stick (SMAW) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| Max Rating | 250A / 25V /100% @ 104°F (40°C) |
| Output Range by Mode | CC-Stick: 50 – 250 Amps, CV-Wire: 14 – 28 Volts |
Engine Driven Welders
| Single Phase Auxiliary Output | 10,000 Watts Continuous, 120/240V |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 14-50R |
| Engine Brand & Model | Kohler OHV Command CH730 |
| Engine Description | 2 Cylinder Air-Cooled Gasoline Engine |
| Engine Horsepower | 23 HP |
| High Idle Operating Speed @ Rated Output | 3600 |
| Fuel Tank Size (US gal.) | 12 |
| Fuel Tank Size (L) | 45.4 |
| Oil Capacity (qts.) | 2.0 |
| Oil Capacity (L) | 1.9 |
Application
| Typical Application | Construction Construction & Field Erection General Fabrication Heavy Fabrication Maintenance & Repair Structural Fabrication Structural Welding |
Warranty
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |
Downloads
FAQs
What arc welding processes are simulated by the VRTEX®
TheVRTEX®360simulates the SMAW (E6010, E6013, and E7018), GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.
TheVRTEX®Mobilesimulates the GMAW (short arc, spray, pulse and STT® metal transfers) and FCAW (Self-shielded and Gas-shielded) processes in the standard system.SMAW (E6010, E6013, and E7018) is an optional hardware and software kit.
SMAW (Optional on VRTEX®Mobile)
- E6010 (Fleetweld®® 5P+)
- E7018 (Excalibur®7018)
- E6013 (Fleetweld®37)
GMAW
- Short Arc (.035” SuperArc®L-56)
- Axial Spray (.045” SuperArc®L-56)
- Pulse (.045” SuperArc®L-56)
- STT®Surface Tension Transfer®(.045” SuperArc®L-56)
FCAW
- Gas-shielded .045 “ (UltraCore®71A85)
- Self-Shielded 5/64” (Innershield®NR-232)
What type of weld joint configurations can I use with the system?
The VRTEX® 360 comes with 5 welding coupons (Flat Plate, Tee Joint, Groove Joint, 2″ XXS Pipe and 6″ Sch 40 pipe) that can be used in multiple positions.
The VRTEX® Mobile comes with 3 welding coupons (Flat Plate, Tee Joint, Groove Joint) that can be used in limited positions.
What positions can I put the VR coupons in?
The VRTEX® 360 supports all positions:
- Plate: Flat, Horizontal, Vertical and Overhead
- Pipe: 2G, 5G and 6G
- The VRTEX® Mobile supports limited positions:
- Plate: Flat, Horizontal and Vertical
Can I run the VRTEX® software on my own computer?
No. The VRTEX® uses an advanced computer system and specialized peripheral equipment to allow the simulation to run smoothly. The system comes with a computer that has been optimized for the needs of the simulation software and peripheral equipment that allows the simulation to work properly.
How can the VRTEX® turn my welding program green?
The VRTEX® system makes it possible to learn how to weld in an eco-friendly manner. Instructors who use virtual reality training will minimize their material waste and environmental footprint. The product teaches welding without the use of shielding gas, welding electrodes or welding coupons and does not require weld fume removal. It also reduces the disposal of waste as a result of training such as base material, consumable parts, etc. The VRTEX® also allows students to be taught with a reduction in overall energy consumption by requiring less energy than a traditional welding machine, feeder and weld fume control system.
Can I use different welding techniques (drag, push, whip, weave, etc.)?
The VRTEX® can be set up by the instructor to accommodate many types of welding techniques such as:
- Push and drag GMAW techniques
- Stringer beads
- Weave techniques – straight, triangle and box weave
How can I save my students’ weld reports?
A USB memory device is inserted into the front of the VRTEX® 360 and the VRTEX® Mobile to collect reports. When the student presses the “End pass” button, the weld information is saved as a .pdf file onto the device. The student reports include all of the information shown on the graphing screen.
How do I integrate this system into my current welding curriculum?
Lincoln Electric's New Lesson’s in VRAW™ Virtual Reality Arc Welding is an integrated approach that blends virtual reality with traditional methods. Please contact us at vrtex@lincolnelectric.com for more details.
Can I run multiple virtual arcs off of one system?
No, one virtual arc per system, similar to a standard welding machine. To maximize the use of the system, many schools currently implementing VR welding training, station two students on the system at a time with one in a coaching role and the other practicing their welding technique. The students are then rotated through the VR Welding lab.
Can I ‘stick’ my electrode?
No. The system does not simulate sticking of the electrode or wire push back due to excessive CTWD. However, the system will not allow the student to weld when a very short arc length or excessive CTWD is used. Students are encouraged to learn about these welding situations as well as the troubleshooting of welding equipment welding through real welding experience.
What languages does the VRTEX® support?
The VRTEX® 360 system includes language support for English, Spanish, French, German, Turkish, Japanese, and Mandarin Chinese.
Recently released! The VRTEX® has now expanded language support for Portuguese (Brazilian) and Russian.
What is the input power and current?
Input power: 115/230/1/50/60
Input current: 4A @ 115, 2A @ 230
Does the VRTEX® require any special set-up and installation procedures?
- The VRTEX®system requires a space of 8’ L x 8’ D x 8’ H (2.4 m x 2.4 m x 2.4 m).
- When operating multiple units in one location, alternate between standard and alternate frequency systems (unique part numbers are identified).
- The VRTEX® system is not designed for operation in harsh environments. Recommendations are listed in the instruction manual.
- Avoid magnetic fields, conductive and high frequency objects and processes.
- An uninterruptible power supply (UPS) may be required for protection of the system from power irregularities and/or disruptions
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recently viewed
