The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and fewer belt replacements. With a fully adjustable platen these sanders will deliver a perfect smooth finish every time.
Offering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you. Don’t take our word for it! Jeff Roltgen of Roltgen Woodworks, had the following to say “Even the fussiest of finishes only need a cursory random orbit sanding after coming out of this machine.
Safety Speed Wide Belt Sanders
An Introduction to our American Made Wide Belt Sanders
Standard Equipment
Photo electric belt tracking.
Pneumatic belt tension.
2 ½” graphite covered felt pad and adjustable platen.
2 rubber-covered pinch rollers 2 ½” OD.
2 machined idler rollers 4 ¼” OD with 1″ bearings.
Rubber-covered contact roller 5 ¼” OD with 1 ⅝” drive bearing.
Conveyor table set on four 1″ acme thread jackscrews.
2 height adjustment indicators.
6″ internal dust chute.
5 emergency stops.
3 year warranty.
Additional information
Weight
1946 lbs
Dimensions
60 × 62 × 71 in
Max. Working Length
Unlimited
Min. Working Length
12"/305mm
Main Motor Options
10 Hp, Single Phase (1~), 220 Volt, 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt, 30 Hp, 3 Phase (3~), 208 Volt / 230 Volt
Where are Safety Speed’s machines made? Our Vertical Panel Saws, Wide Belt Sanders, Screw Pocket Machines, Edgebanders, Saw & Router Combination Machines are made in Ham Lake, Minnesota. Our vertical substrate cutters and desktop trimmers are made in the United Kingdom
Does Safety Speed have Guidance on Receiving a New Machine? We ask that you carefully inspect your crated machine before signing off on any paperwork to accept the machine in. This may be an inconvenience for the truck driver but it is imperative that you inspect it prior to signing off on it.Please review this flyer on receiving your machine in.
Does Safety Speed Ship internationally? Yes, we ship across the world with dealers in North America, South America, Europe, Asia, Australia who have our machines in stock and can help handle logistical challenges for custom orders.
How long does it take to receive a new machine after placing an order? Most of our machines will be built by our machine builders within two or three weeks of receiving the order. Since our machines are made in America, some of our machines can take longer for our team to build.
I have an older Safety Speed Machine and need an Operator’s Manual and parts diagram, where do I find it? Our parts diagrams and manualscan be found here.Please contact our team if you cannot find what you need.
Does Safety Speed offer replacement parts for older machines? We carry stock of parts for our machines and most are available for quick shipment within 3 business days. Luckily, our panel saws have not changed much over the years which allows us to support very old machines.
How long will it take me to receive an order of parts or accessories? We ship most parts orders within 3 business days and do offer rush deliveries for an additional charge.
About Safety Speed
Inventing the vertical panel saw out of his suburban Minneapolis garage in 1958, Safety Speed founder, the late Gene Olson started writing our story in 1958. He owned a construction company in Minneapolis but had trouble keeping up with his carpenters due to having polio. He identified the need to efficiently and accurately cut large panels of wood easier than with his table saw. He put together a frame and attached a SKILSAW to make cuts and quickly realized that he had a million-dollar idea. He left the construction industry altogether and founded Safety Speed Cut Manufacturing, a name which stood until 2011 when it became Safety Speed Manufacturing to reflect that Safety Speed no longer was just about cutting.
Our reputation is in our name; we’ve produced the safest tools on the market, while providing saws with crosscut tolerances within 0.005” straight and square. We’ve lead American manufacturers in Vertical Panel Saws and Panel Routers since 1958 with over 70,000 machines sold worldwide.
We introduced a successful line ofWide Belt Sanderswith 37 and 43 inch capacities in 2003. In 2008 we expanded yet again to meet the needs of our customers acquiring a proven line ofEdgebandersfeaturing glue pot and hot air machines.
2013 was the debut of ourScrew Pocket machinesfor the wood industry and the first introduction of ourdust free, vertical substrate cutter product linefor the sign making industry where we introduced two cutters. We expanded the dust free substrate cutter product line to include fourDesktop Cuttersin 2015. These additions, engineered with the customer in mind, provided innovative solutions to meet the industries ever-changing needs of both industries.
At Safety Speed our passion is building strong relationships by offering superior quality and value through manufacturing panel processing and fabricating equipment.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
Opens in a new window.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
Searched other websites and this one had what I was looking for with a competetive price. Fast and easy checkout.
Laguna Tools Industrial Edgebander - Bandit 3/2
Percival Brakus
Really didn't need the Deep cut but figured I would take that route as future-proofing needs and figured this was the top-of-the-line unit.
LimbSaw Hydraulic Circular Saw
Safety Speed 4375 Wide Belt Sander
The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and fewer belt replacements. With a fully adjustable platen these sanders will deliver a perfect smooth finish every time.
Offering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you. Don’t take our word for it! Jeff Roltgen of Roltgen Woodworks, had the following to say “Even the fussiest of finishes only need a cursory random orbit sanding after coming out of this machine.
Safety Speed Wide Belt Sanders
An Introduction to our American Made Wide Belt Sanders
Standard Equipment
Photo electric belt tracking.
Pneumatic belt tension.
2 ½” graphite covered felt pad and adjustable platen.
2 rubber-covered pinch rollers 2 ½” OD.
2 machined idler rollers 4 ¼” OD with 1″ bearings.
Rubber-covered contact roller 5 ¼” OD with 1 ⅝” drive bearing.
Conveyor table set on four 1″ acme thread jackscrews.
2 height adjustment indicators.
6″ internal dust chute.
5 emergency stops.
3 year warranty.
Additional information
Weight
1946 lbs
Dimensions
60 × 62 × 71 in
Max. Working Length
Unlimited
Min. Working Length
12"/305mm
Main Motor Options
10 Hp, Single Phase (1~), 220 Volt, 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt, 30 Hp, 3 Phase (3~), 208 Volt / 230 Volt
Where are Safety Speed’s machines made? Our Vertical Panel Saws, Wide Belt Sanders, Screw Pocket Machines, Edgebanders, Saw & Router Combination Machines are made in Ham Lake, Minnesota. Our vertical substrate cutters and desktop trimmers are made in the United Kingdom
Does Safety Speed have Guidance on Receiving a New Machine? We ask that you carefully inspect your crated machine before signing off on any paperwork to accept the machine in. This may be an inconvenience for the truck driver but it is imperative that you inspect it prior to signing off on it.Please review this flyer on receiving your machine in.
Does Safety Speed Ship internationally? Yes, we ship across the world with dealers in North America, South America, Europe, Asia, Australia who have our machines in stock and can help handle logistical challenges for custom orders.
How long does it take to receive a new machine after placing an order? Most of our machines will be built by our machine builders within two or three weeks of receiving the order. Since our machines are made in America, some of our machines can take longer for our team to build.
I have an older Safety Speed Machine and need an Operator’s Manual and parts diagram, where do I find it? Our parts diagrams and manualscan be found here.Please contact our team if you cannot find what you need.
Does Safety Speed offer replacement parts for older machines? We carry stock of parts for our machines and most are available for quick shipment within 3 business days. Luckily, our panel saws have not changed much over the years which allows us to support very old machines.
How long will it take me to receive an order of parts or accessories? We ship most parts orders within 3 business days and do offer rush deliveries for an additional charge.
About Safety Speed
Inventing the vertical panel saw out of his suburban Minneapolis garage in 1958, Safety Speed founder, the late Gene Olson started writing our story in 1958. He owned a construction company in Minneapolis but had trouble keeping up with his carpenters due to having polio. He identified the need to efficiently and accurately cut large panels of wood easier than with his table saw. He put together a frame and attached a SKILSAW to make cuts and quickly realized that he had a million-dollar idea. He left the construction industry altogether and founded Safety Speed Cut Manufacturing, a name which stood until 2011 when it became Safety Speed Manufacturing to reflect that Safety Speed no longer was just about cutting.
Our reputation is in our name; we’ve produced the safest tools on the market, while providing saws with crosscut tolerances within 0.005” straight and square. We’ve lead American manufacturers in Vertical Panel Saws and Panel Routers since 1958 with over 70,000 machines sold worldwide.
We introduced a successful line ofWide Belt Sanderswith 37 and 43 inch capacities in 2003. In 2008 we expanded yet again to meet the needs of our customers acquiring a proven line ofEdgebandersfeaturing glue pot and hot air machines.
2013 was the debut of ourScrew Pocket machinesfor the wood industry and the first introduction of ourdust free, vertical substrate cutter product linefor the sign making industry where we introduced two cutters. We expanded the dust free substrate cutter product line to include fourDesktop Cuttersin 2015. These additions, engineered with the customer in mind, provided innovative solutions to meet the industries ever-changing needs of both industries.
At Safety Speed our passion is building strong relationships by offering superior quality and value through manufacturing panel processing and fabricating equipment.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
