Save the cost of an expensive crane with a Star Industries Quick Tach (QT) Truss Boom.
With a vertical reach of up to 15’ and load capacity from 2,000 lbs to 22,000 lbs, the Star QT Truss Boom is ideal for metal building erection, setting wooden trusses, putting up post frame buildings and many more crane type jobs.
Combine the lifting capability of a crane with the speed and maneuverability of an extendable reach forklift
Suitable for use on most surfaces including muddy and rough job sites
Built to last with fully welded, square tube construction for extra strength and durability.
Specifications
Style
Model
A Effective Length
B Effective Height
C Back Width
Capacity
Empty Weight
Overall Length
Low Profile Truss Boom
1302
2 ft
26.5”
31”
10,000 lbs
± 335 lbs
2’ – 5”
1302-12K
2 ft
26.5”
31”
12,000 lbs
± 341 lbs
2’ – 5”
1303
2 ft
36”
40”
up to 22,000 lbs
± 550 lbs
2’ – 5”
1310
10 ft
26.5”
31”
2,000 lbs
± 480 lbs
10’ – 5”
1320
12 ft
26.5”
31”
2,000 lbs
± 560 lbs
12’ – 0”
1330
15 ft
26.5”
31”
2,000 lbs
± 640 lbs
15’ – 5”
Wide Back Truss Boom
1325
12 ft
36”
45”
2,000 lbs
± 90 lbs
12’ – 4”
1335
15 ft
36”
45”
2,000 lbs
± 795 lbs
15’ – 4”
The standard “Low Profile” Truss Boom is used with most forklift models except those that utilize an extra wide quick-tach design.
JCB Q-Fit, Gehl Dynacarrier, Bobcat Versa Handler and Ingersoll-Rand models VR518, VR623, VR638 quick-tach designs require the “Wide Back”.
Dimensions and empty weights will vary depending on which Quick-Tach is required. Above load ratings are for the truss boom only and do not reflect actual forklift load capabilities. Forklift make, model, quick-tach style and serial number may be required when ordering.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We recently purchased a saw and had a few issues. The bolts were missing, so we had to buy replacements from a local hardware store. Several other parts didn’t come in the shipment, and we ended up being charged extra to get them because they weren’t included in the original package. On top of that, the lead time was much longer than expected.
The one positive was the customer support team—email communication was excellent. They responded quickly and were helpful throughout the process.
What a nice piece of machinery. I’ve used a few times on both soft and hardwood. The finished product is smooth with very little sanding required. I’ve had a bit of snipe at the end of some longer boards but it’s negligible and to be honest it’s probably my lack of patience. Nice addition to my small hobby shop. Well worth the money.
bartell has to be the worst company to deal with, they do not have service manuals available on their website, service is not great. their equipment is not build to withstand construction applications. the manuals you can find are super cryptic and drawn out by a toddler. it's too bad i can't leave a lower score i feel like one star is still too good for them. get your stuff figured out guys, stop slapping your name on chinese garbage
Save the cost of an expensive crane with a Star Industries Quick Tach (QT) Truss Boom.
With a vertical reach of up to 15’ and load capacity from 2,000 lbs to 22,000 lbs, the Star QT Truss Boom is ideal for metal building erection, setting wooden trusses, putting up post frame buildings and many more crane type jobs.
Combine the lifting capability of a crane with the speed and maneuverability of an extendable reach forklift
Suitable for use on most surfaces including muddy and rough job sites
Built to last with fully welded, square tube construction for extra strength and durability.
Specifications
Style
Model
A Effective Length
B Effective Height
C Back Width
Capacity
Empty Weight
Overall Length
Low Profile Truss Boom
1302
2 ft
26.5”
31”
10,000 lbs
± 335 lbs
2’ – 5”
1302-12K
2 ft
26.5”
31”
12,000 lbs
± 341 lbs
2’ – 5”
1303
2 ft
36”
40”
up to 22,000 lbs
± 550 lbs
2’ – 5”
1310
10 ft
26.5”
31”
2,000 lbs
± 480 lbs
10’ – 5”
1320
12 ft
26.5”
31”
2,000 lbs
± 560 lbs
12’ – 0”
1330
15 ft
26.5”
31”
2,000 lbs
± 640 lbs
15’ – 5”
Wide Back Truss Boom
1325
12 ft
36”
45”
2,000 lbs
± 90 lbs
12’ – 4”
1335
15 ft
36”
45”
2,000 lbs
± 795 lbs
15’ – 4”
The standard “Low Profile” Truss Boom is used with most forklift models except those that utilize an extra wide quick-tach design.
JCB Q-Fit, Gehl Dynacarrier, Bobcat Versa Handler and Ingersoll-Rand models VR518, VR623, VR638 quick-tach designs require the “Wide Back”.
Dimensions and empty weights will vary depending on which Quick-Tach is required. Above load ratings are for the truss boom only and do not reflect actual forklift load capabilities. Forklift make, model, quick-tach style and serial number may be required when ordering.
Are your attachments approved by the forklift manufacturers? We have a number of letters of approval from forklift manufacturers for varied Star attachments. In cases where the forklift manufacturer is unwilling or unable to provide a letter of approval on some attachments we can often offer an approval letter from an independent engineer as allowed by OSHA in their interpretations.
How do I determine which fork to buy for my forklift? First determine how the fork attaches to the carriage. There are two primary types used on most forklifts and telehandlers. ITA style forks - these hang on a notched bar and are the style used on most small to medium warehouse type forklifts. These are also found most frequently on fork frame attachments for loaders. ITA forks are built to a standard to match the carriage class of the forklift. There are five classes – Class I, Class II, Class III, Class IV and Class V. You will see a drawing on the fork page on our website that will show you how to determine your fork’s class. Shaft Mounted style forks - these forks are mounted on a round shaft. The dimension of the shaft and back vary with the forklift manufacturer and sometimes with the forklift model. Star has the specs for most telehandlers and many straight mast forklifts. All we need to know is the brand, model and sometimes the year of your forklift. For those we don’t have on file, there is form you can access here that will guide you through the dimensions needed for your forks.
How long has Star been in business and how did it start? Star Industries was started in 1981 by Ben Huges who was the number one dealer nationwide for Skytrak telehanders. Ben envisioned that the telehander could do so much more than just lift palletized material, so he designed and developed a broad line of telehandler and forklift attachments to provide this added versatility. He was the originator of a great many of the forklift attachments sold today.
Where are Star attachments manufactured? All our equipment attachments are proudly manufactured in the USA.
Why Buy From Us
Why Buy From Us
Here are are few more great reasons to buy from us:
Returns are easy, simplycontact usfor a returns number and send your item to our returns center for fast processing. We'll get you a replacement or refund in a snap! *Customer will be responsible for return shipping cost.
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.
Ordering from Landmark Tools is 100% safe and secureso you can rest easy. Your personal details are never shared, sold or rented to anyone either.
Zion Monahan
Great buy!
Im quite impressed with this company, they have incompatible prices. Their general shipping was super fast and they have great customer service
LimbSaw Hydraulic Circular Saw
Abby Volkman
best prices of anywhere I looked so I decided to try it. I was definitely skeptical but received my order within 4 days without any issues.
Laguna Tools Classic Double Drum Sander - 37x2
Kelley Hand
Great buy!
I have been casually looking at other machines and all more expensive, but this one stands out
