U.S. Industrial Machinery Hydraulic Press Brake, 22 Ton X 4’, with Simple CNC

Product Description

Features Of The USHB22-4SCNC

Our CNC control hydraulic press brakes offer users the ability to tackle any project with precision, speed, and volume. These machines can handle the most demanding jobs with impeccable details. The capability to use a removable USB drive means that additional program storage is virtually limitless. Other key features include:

• 6” LCD touchscreen to control the bend angle and back-gauge position
• 10 bends per program or cross-section
• Up to 20 punch library and up to 50 die library
• Auto bend sequence
• Auto back-gauge retract
• Spread length
• Interference bend chart
• Calculated bend allowance
• Programmable ram dwell
• And more

Standard Equipment

(All of the following comes with the machine)

• Ram Deflection Adjustment

• Setting for ram speed slowdown and rapid return position

• Massive Torsion Bar for Parallelism

• Forged Heavy Duty Cylinder and Cylinder Body

• Three Speed Ram

• Rapid Approach, Bending Cycle and Rapid Retreat

• Bottom Time Delay

• All Steel Construction

• Inching, Single Cycle and Auto Run

• Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included

• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1

• Space between Ram Tool Clamps allows for deep box bending

• Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel (See note on page 2.)

Specification

• Working Pressure: 22 Tons

• Length of Working Table: 51.9”

• Distance Between Housings: 40.1”

• Throat Depth: 7.8”

• Stroke Adjustment of Ram: 2.75”

• Ram Travel: 3.14”

• Open Height: 9.64”

• Rapid Ram Travel Speed: 2.4”/sec.

• Rapid Ram Retreat Speed: 2.0”/sec.

• Backgauge Travel: 24”

• Pressing Speed: Dependent on Tool Load

• Motor Horsepower: 7.5 HP

• Hydraulic Oil Capacity: 21 Gal. 220 or 440 Volts, 3 ph.

• Length: 73”

• Net Weight: 4,400 lbs.

• Width: 56”

• Height: 77”

Product Included

Simple CNC

Sick deTec 2 Light Curtain

AVAILABLE OPTIONS

• Upgrade to Graphic CNC and Sick deTec 4 Light Curtain……add to total $4,000.00

• Upgrade to Graphic CNC and Fiessler Akas II Laser Guarding…add to total $9,000.00 • Upgrade to Cam-Lever Quick Action Ram Clamps $1,995.00

• Training in our Memphis, TN Facility No Charge

• Training at customer site, less than 300 miles from Memphis: $2,995.00

• Training at customer site, more than 300 miles from Memphis: $3,995.00 (If outside continental USA, please call for quote.)

See all products from U.S. Industrial Machinery. Other similar brake presses are made by GMC Machine Tools.

Also make sure you check out these similar machines:

• GMC Hydraulic CNC Press Brake
• U.S. Industrial Machinery Hydraulic Press Brake, 200 Ton x 8’, w/manual controls - USHB200-8HM
• U.S. Industrial Machinery Hydraulic Press Brake, 250 TON x 13’, with CNC - USHB250-13CNC
• U.S. Industrial Machinery Hydraulic Press Brake, 200 Ton x 10’, with Graphic CNC - USHB200-10CNC